Optimize your 5.25" external device bay with ICY DOCK ExpressCage SSD / hard drive enclosures

Power users are on another level from the rest --they're the people that demand the most for their purposes. A Toyota Prius wouldn't satiate their needs for an off road expedition through the difficult terrains of the safari, and likewise a small budget computer won't satisfy their computing needs. A high performance system isn't cut out for power users unless it can deliver the storage needs of that user. They're the individuals that require high capacity hot-swappable SSDs and complex RAID configurations while at the same time maximizing storage density for a smaller system footprint. It’s no surprise that these features are all important when a power user decides on which components suit them best, and it's no surprise that ICY DOCK is usually on that list. Power users' care about performance and in many cases paying a little bit more to achieve better performance is preferable. The ExpressCage not only give you the performance you need, but also gives you a better user experience. Best of all, it has a very affordable price point for all the features it offers.

Both ExpressCage MB322SP-B and MB324SP-B utilize the generic 5.25" external bay but they're far from generic. The ExpressCage features our innovative ExpressTrays which shortens installation time to where it's just as fast as having a tray-less design with the added stability of having a tray. To install a 2.5" SSD / HDD with ExpressCage is simple. Place the SSD or HDD onto the tray and make sure the built-in screw thread passes through the mounting holes of the drive and then slide the tray into the enclosure. Once the tray is fully inserted, the soft pad in the enclosure pushes the drive so the screw thread bites the mounting hole which secures the drive. The ExpressTray blends flexibility with stability, making it perfect for applications that require a lot of drive swapping but also requires some drive stability such as mobile storage systems or pre-built systems. It is also great for power user looking for high density hot-swappable 2.5" bays.

The ExpressCage MB322SP-B converts a 5.25" external bay into dual hot-swappable 2.5" bays and it also gives you an extra 3.5" slot for a 3.5" hard drive or a 3.5" device. There are tons of configurations you can do with MB322SP-B. For example, you can have 2 x 2.5" SATA III SSDs in RAID 0 for intense applications or games, and put an 8TB HDD in the 3.5" slot for storage. Alternatively you can put an ICY DOCK MB992SK-B SSD mobile rack so you can add two more SSD in RAID 1 for backup. The 3.5" bay can be used for any 3.5" device such as card reader, fan controller and USB hubs. If you would like to know more about MB322SP-B click HERE to see the product page.

Looking to upgrade more 2.5" SSD drives to your system? Do you have some 2.5" drives on hand with no enclosure to support them? No problem! The ExpressCage MB324SP-B converts a single 5.25" into quad 2.5" SSD / HDD bays with hot-swappable function. You can use it as a JBOD enclosure and mix it up with your SSD and HDD collection, or use it for the RAID setup such as RAID 10, RAID 5 or RAID 0 + 1. No matter what you do, the ExpressTray allows you to quickly install or swap the drive within seconds. Click HERE to learn more about MB324SP-B.

If you have any further questions, please feel free to contact us by email at tech@icydock.com