×
Advanced Product Search Menu
全部
Ruggedized
  • Concept Product CP138
    Concept Product CP138
    Concept Product CP138
    Product FeaturesView All

    •Supports 1 x 7.5mm height E3.S NVMe SSD
    •Compatible with PCIe x4/ x8 /x16 Slot
    •Supports PCIe Gen 5.0 x 4 speed up to 128Gbps
    •Supports drive hot-plug without requiring the system to be powered down
    •Active Power Technology (APT) – drive activity LED only powers up if there is a drive installed in the bay
    •Optional 4-pin drive activity signal output - allows for easy transfer of the drive activity signal to the front of the computer case

  • Concept Product CP133-1
    Concept Product CP133-1
    Concept Product CP133-1
    Product FeaturesView All

    •Designed for a 3.5" floppy bay in either a computer case or rackmount.
    •Holds 2 x EDSFF E1.S NVMe SSDs (compatible with 9.5mm and 15mm heights).
    •Built-in hardware RAID 1, RAID 0, JBOD, and SPAN (BIG) modes.
    •Uses a SlimSAS 8i connector, supporting PCIe 3.0 x4 with transfer speeds up to 32GB/s.
    •Features a removable drive tray with tool-less SSD installation for user-friendly maintenance.
    •Features a removable drive tray with tool-less SSD installation for user-friendly maintenance.

  • Concept Product CP133
    Concept Product CP133
    Concept Product CP133
    Product FeaturesView All

    •Designed for a 3.5" floppy bay in either a computer case or rackmount.
    •Holds 2 x EDSFF E1.S NVMe SSDs (compatible with 9.5mm and 15mm heights).
    •Uses a MCIO 8i connector, supporting PCIe 5.0 x4 with transfer speeds up to 128GB/s.
    •Features a removable drive tray with tool-less SSD installation for user-friendly maintenance.
    •Comes equipped with two 25mm fans, which can be replaced without disassembling the entire unit.
    •Supports hot-swap functionality for EDSFF E1.S SSD (dependent on host environment).

  • Concept Product CP132
    Concept Product CP132
    Product FeaturesView All

    •Fits 1x 5.25" optical drive bay of a computer case or rackmount
    •Accommodates 4x 2.5" U.2/U.3 NVMe SSDs, up to 15mm in height
    •Utilizes 2x MCIO 8i connectors, supports PCIe 5.0 x4 with up to 128GB/s transfer speeds
    •Removable drive caddy with retractable handle for easy installation/removal of 4 drives at once
    •Equipped with dual 40x40x20mm fans; fans can be replaced without disassembling the unit
    •Supports hot-plug functionality for U.2/U.3 NVMe SSDs (host environment must support hot-plug)

  • Concept Product CP130
    Concept Product CP130
    Concept Product CP130
    Product FeaturesView All

    •Supports 1x M.2 PCIe NVMe SSD, sizes 2230, 2242, 2260, 2280, 22110
    •Support transfer speeds up 16Gbps under PCIe 3.0 x2 using CFexpress Type B connection
    •Removable drive tray with tool-less drive installation for easy drive maintenance
    •The removable drive tray is equipped with a heat sink for optimal cooling efficiency
    •Multiple 1/4" mounting holes for universal mounting on various camera systems
    •Include a 1/4" to 3/8" reducer bushing for the 3/8" mounting system

  • Concept Product CP128
    Concept Product CP128
    Concept Product CP128
    Product FeaturesView All

    •World’s first Universal Backplane Management (UBM) drive mobile rack enclosure
    •Supports 4 x 2.5" SAS/SATA/NVMe (U.2/U.3) SSD/HDD
    •Supports SAS 4.0 (up to 22.5Gbps), SATA 3.0 (up to 6Gbps), and NVMe Gen 4 (up to 64Gbps)
    •Installs into any standard external 5.25" optical drive bay
    •Uses 2 x SlimSAS 8i (SFF-8654) rear connectors
    •Ruggedized full-metal enclosure meeting flammability requirements

  • Concept Product CP128-1
    Concept Product CP128-1
    Concept Product CP128-1
    Product FeaturesView All

    •World’s first Universal Backplane Management (UBM) drive mobile rack enclosure
    •Supports 4x 2.5" SAS/SATA/U.3 NVMe SSD/HDD (Tri-mode adapter is required to access SAS, SATA, and U.3 NVMe through the same drive bay)
    •Supports SAS 4.0 (up to 22.5Gbps), SATA 3.0 (up to 6Gbps), and NVMe Gen 4 (up to 64Gbps)
    •Installs into any standard external 5.25” optical drive bay
    •Uses 2x SlimSAS 8i (SFF-8654) rear connectors
    •Ruggedized full-metal enclosure meeting flammability requirements

  • Concept Product CP121
    Concept Product CP121
    Concept Product CP121
    Product FeaturesView All

    •Fits in Standard 5.25" Drive Bay.
    •Supports 8 x E1.S (EDSFF) NVMe SSDs (5.9/8.01mm height) or 8 x M.2 NVMe SSD (2230/2242/2260/2280/22110).
    •Uses 4 x SlimSAS 8i (SFF-8654) port supports PCIe 4.0 x4 of up to 64Gbps data transfer rates.
    •Ability to mix and match E1.S and M.2 NVMe SSDs in a single enclosure.
    •Supports tool-less drive installation for both E1.S and M.2 NVMe SSDs.
    •Equipped with dual 40mm detachable fans for superior cooling performance.

  • Concept Product CP116
    Concept Product CP116
    Concept Product CP116
    Product FeaturesView All

    •Fits 4 x E1.S (EDSFF) NVMe SSD (5.9mm/8.01mm/9.5mm/15mm) or
    4x M.2 NVMe SSD (2230/2242/2260/2280/22110) in a 5.25" external drive bay.
    •Uses 2 x MCIO 8i (SFF-TA-1016 8i) port supports PCIe 5.0x4 of up to 128Gbps data transfer rates.
    •Full-metal housing and drive tray provide excellent durability and robustness - ideal for the enterprise-level data storage environment.
    •Equipped with dual 40mm detachable fans for superior cooling performance.
    •The Eagle-hook tray latch design securely holds the drive trays within the enclosure.
    •Anti-Vibration (AVT) technology provides a stable and safe operating environment for SSDs.

  • Concept Product  CP115 (MB111VP-B)
    Product FeaturesView All

    •Supports 1 x U.2 NVMe SSD up to 9.5mm height
    •Use 1 x PCIe 4.0 x4 interface and supports installation into PCIe 1.0/2.0/3.0/4.0 x4, x8, and x16 slots
    •Support PCIe 4.0 x4 with transfer rates up to 64Gbps
    •Removable drive tray with tool-less drive installation design for easy drive maintenance
    •Eagle-hook lock system keeps the drive secure in the enclosure
    •EMI grounding - protects hard drives from electrical damage

  • Concept Product CP114
    Product FeaturesView All

    •Fits 1x EDSFF E1.S SSD with a maximum drive thickness of 5.9mm
    •Use 1x PCIe 4.0 x4 interface, also supports installation into PCIe 1.0/2.0/3.0/4.0 x4, x8, and x16 slots
    •Support PCIe 4.0 x4 with transfer rates up to 64Gbps
    •Includes half-height and full-height PCIe brackets
    •Removable drive tray with tool-less drive installation design for easy drive maintenance
    •Low profile design allows for multiple bays to be installed side-by-side in a modular design

  • Concept Product CP104
    Product FeaturesView All

    •Fits 8 x 2.5" U.2 NVMe SSDs into 2 x 5.25" external drive bay
    •Removable drive tray for easy drive installation and removals
    •Uses 4 x MCIO 8i ports to connect (NVMe host required)
    •MCIO 8i connector pinout supports SFF-TA-1016 8i specification
    •Supports the full PCIe 5.0 x4 bandwidth specifications of 128GB/s per drive bay
    •Ruggedized full metal housing and tray that meets flammability requirement

Advanced Product Search Menu
SUBMIT CLEAR CANCEL
Can’t find any suitable products? Submit your requestHERE
We use cookies in order to give you the best possible experience on our website   More Info
Understood