• Fits 1x EDSFF E1.S SSD with a maximum drive thickness of 9.5mm
• Use 1x PCIe 5.0 x4 interface, also supports installation into PCIe 1.0/2.0/3.0/4.0/5.0 x4, x8, and x16 slots
• Support PCIe 5.0 x4 with transfer rates up to 128Gbps
• Includes half-height and full-height PCIe brackets
• Removable drive tray with tool-less drive installation design for easy drive maintenance

• Supports 1 × E1.S NVMe SSD up to 9.5mm height • Removable tray design for simplified SSD maintenance and replacement • Tool-less SSD installation design • PCIe 5.0 x4 interface up to 128Gbps (depending on SSD performance) • MCIO 4i host interface • Ultra-slim enclosure optimized for non-standard installation spaces

• Ultra-compact, non-standard module size tailored for OEM and rackmount system integration • Supports 4 × 15mm E1.S NVMe SSDs • PCIe 5.0 x4 bandwidth up to 128Gbps per SSD (depending on SSD performance) • 2 × MCIO 8i (SFF-TA-1016) host interfaces • Open rear-panel ventilation design for reduced airflow restriction • Horizontal PCB layout optimized for rackmount airflow

• Supports 8 × 9.5mm E1.S NVMe SSDs
• Fits one standard 5.25” drive bay
• PCIe 5.0 x4 bandwidth up to 128Gbps per SSD (depending on SSD performance)
• 4 × MCIO 8i (SFF-TA-1016) host interfaces
• Removable E1.S SSD tray design for easier maintenance and serviceability
• Liquid-cooling architecture for high-efficiency thermal management

•Supports 8 x 15mm / 9.5mm E1.S SSDs in a single 5.25" bay.
•PCIe Gen 5.0 x4 interface — up to 128Gbps per drive.
•Complies with UBM (SFF-TA-1005) backplane management standard.
•4 x MCIO 8i connectors support PCIe bifurcation (x4/x2/x1).
•Compatible with Broadcom, HighPoint, Areca, and other HBA/RAID cards.
•Supports Hot-Plug drive swapping.

•Converts 5.9mm or 8.01mm E1.S SSDs to 9.5mm E1.S mechanical form factor
•Converts 5.9mm or 8.01mm E1.S SSDs to 9.5mm E1.S mechanical form factor
•Fully compatible with standard 9.5mm E1.S trays, tool-less carriers, and hot-swap drive bays
•Full-metal construction enhances protection and passive cooling
•Includes both thin and thick thermal pads for optimal heat transfer
•Tool-less SSD installation

•Converts standard M.2 NVMe SSDs (2230/2242/2260/2280) to 9.5mm E1.S SSD form factor
•Fully matches E1.S mechanical and electrical specifications (SFF-TA-1006 + SFF-TA-1002)
•Compatible with PCIe Gen 3/4/5 NVMe SSDs for up to 128Gbps data rate
•Ideal for E1.S drive bays in enterprise servers, AI edge systems, and modular compute nodes
•Internal bridge connector minimizes M.2 connector wear from frequent insertions
•Full-metal housing ensures structural integrity, EMI shielding, and thermal dissipation
•Ideal for system builders, server OEMs, and platform engineers validating E1.S systems

•Designed for a 3.5" floppy bay in either a computer case or rackmount.
•Holds 2 x EDSFF E1.S NVMe SSDs (compatible with 9.5mm and 15mm heights).
•Uses a MCIO 8i connector, supporting PCIe 5.0 x4 with transfer speeds up to 128GB/s.
•Features a removable drive tray with tool-less SSD installation for user-friendly maintenance.
•Comes equipped with two 25mm fans, which can be replaced without disassembling the entire unit.
•Supports hot-swap functionality for EDSFF E1.S SSD (dependent on host environment).