全部
ToughArmor Series
  • ToughArmor MB118VP-B
    ToughArmor MB118VP-B
    ToughArmor MB118VP-B
    Product FeaturesView All

    •Supports 6x U.2/U.3 PCIe NVMe SSD, with a max drive height of 9.5mm
    •Designed to fit into any standard external 5.25" optical drive bay
    •Utilizes 3x slimSAS 8i (SFF-8654) to support 6x U.2/U.3 SSDs
    •Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
    •Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more)
    •Ruggedized full-metal enclosure that meets flammability requirements

  • ToughArmor MB111VP-B
    ToughArmor MB111VP-B
    ToughArmor MB111VP-B
    Product FeaturesView All

    •Supports 1 x U.2/U.3 NVMe SSD with a height of up to 9.5mm
    •Compatible with PCIe 4.0 x4/ x8 /x16 Slot
    •Supports PCIe Gen 4.0 x 4 speed up to 64Gbps
    •Supports drive hot-plug without requiring the system to be powered down
    •Active Power Technology (APT) – drive activity LED only powers up if there is a drive installed in the bay
    •Optional 2-pin drive activity signal output - allows for easy transfer of the drive activity signal to the front of the computer case

  • ToughArmor MB699VP-B V3
    ToughArmor MB699VP-B V3
    ToughArmor MB699VP-B V3
    Product FeaturesView All

    •Supports 4x PCIe NVMe U.2/U.3 SSD, up to 15mm drive height
    •Installs into any standard external 5.25" optical drive bay
    •Uses 4x OCuLink (SFF-8612) to connect, pin-out defined by SFF-9402 Rev 1.1
    •Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
    •Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more)
    •Ruggedized full-metal enclosure meeting flammability requirements

    nvme_enclosures , minisas_hd_enclosures

  • ToughArmor MB092VK-B
    ToughArmor MB092VK-B
    ToughArmor MB092VK-B
    Product FeaturesView All

    •Fits 2x 2.5” U.2/U.3 NVMe SSDs from 5-9.5mm height •Installs into standardized external 3.5” device bay (floppy bay) •Uses 2x Slimline SAS (SFF-8654 4i) connector, pinout defined by SFF-9402 Rev 1.1 •Supports NVMe 4.0 64Gbps transfer rates per drive bay •Ruggedized full-metal enclosure and drive trays •2-segment key lock for additional physical security •Eagle-hook tray latch securely holds the tray inside the enclosure •EMI Grounding – protects SSDs from electrical damage •Active Power Technology (APT) – saves power by shutting down when no drives are installed •Industry-leading 5 years limited warranty against all defects •Complimentary support from a professionally trained US-based technical support agent

  • ToughArmor MB699VP-B V2
    ToughArmor MB699VP-B V2
    ToughArmor MB699VP-B V2
    Product FeaturesView All

    •Supports 4x PCIe NVMe U.2 SSD, up to 15mm drive height
    •Installs into any standard external 5.25" optical drive bay
    •Uses 4x OCuLink (SFF-8612) to connect, pin-out defined by SFF-9402 Rev 1.1
    •Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
    •Ruggedized full-metal enclosure meeting flammability requirements
    •Removable tray system for easy maintenance

    nvme_enclosures , minisas_hd_enclosures

  • ToughArmor RAID MB902SPR-B
    ToughArmor RAID MB902SPR-B
    ToughArmor RAID MB902SPR-B
    Product FeaturesView All

    •Supports 2 x 2.5” SATA HDD/SSD, from 5-15mm height
    •Installs into any standard external 1 x 5.25” optical drive bay
    •Supports up to 6 Gbps data transfer speed
    •Built-In JMS562 hardware RAID 1 mirroring (SAFE) chipset
    •Easy to read RAID status LED indicators for drive power, access, fail, and RAID 1 rebuilding process
    •Anti-Vibration Technology (AVT) – reduces noise and protects against environmental damage

  • ToughArmor MB924IP-B
    ToughArmor MB924IP-B
    ToughArmor MB924IP-B
    Product FeaturesView All

    •Supports 24 x 2.5" SAS/SATA SSDs & HDDs, up to 7mm in height
    •Installs into 3 x standard external 5.25" bay
    •Transfer speed up to 12Gb/s for SAS drives & 6Gb/s for SATA drives
    •Powers 24 x 2.5" SAS/SATA drive through 6 x 15-pin SATA power connector
    •Connects 24 x 2.5” SAS/SATA drive through 6 x MiniSAS HD (SFF-8643) connector
    •Large 80mm cooling fan with three-mode fan speed control (high/low/off)

  • ToughArmor MB839SP-B
    ToughArmor MB839SP-B
    ToughArmor MB839SP-B
    Product FeaturesView All

    •Compatible with Mac Pro 2008-2012 models with no driver required
    •Fits 1x SATA hard drive or SSD from 7mm to 9.5mm in height
    •Uses PCIe 2.0 x1 interface, also supports installation into PCIe 2.0 and PCIe 3.0 x1, x4, x8, and x16 slots
    •Installs into single-width PCIe expansion slot
    •PCIe interface provides both power and data transfer which ultimately reduce cable clutter
    •Narrow design allows for multiple bays to be installed side-by-side in a modular design

    other_compatible_enclosures

  • ToughArmor MB601VK-1B
    ToughArmor MB601VK-1B
    ToughArmor MB601VK-1B
    Product FeaturesView All

    •Fits 1x 2.5” U.2 NVMe SSD or 2.5" SAS / SATA SSD
    (NVMe U.2 host is required to accept NVMe SSD, SAS or SATA SSD)
    •Installs into any standard external 3.5” device bay or floppy bay
    •Uses an U.2 port (SFF-8639) to connect, requires NVMe host
    •Supports the full NVMe bandwidth specification of 64 Gbps
    •Ruggedized full-metal enclosure meeting flammability requirements
    •2-segment key lock for additional physical security

    nvme_enclosures

  • EZConvert MB705M2P-B
    EZConvert MB705M2P-B
    EZConvert MB705M2P-B
    Product FeaturesView All

    •Convert your M.2 NVMe SSD into the 2.5” U.2 NVMe form factor with 9.5mm height
    •Exact same dimensions, port locations, and screw-hole locations as a standard U.2 drive
    •Accepts any M.2 PCIe NVMe SSD from 30mm to 80mm in length
    •Enables hot-plug functionality for any M.2 PCIe NVMe SSD
    •10,000 insertion/removal cycle rated U.2 connector
    •Supports full Nvme bandwidth specification of 64Gbps

    hdd_ssd_adapters nvme_enclosures

  • EZConvert MB703M2P-B
    EZConvert MB703M2P-B
    EZConvert MB703M2P-B
    Product FeaturesView All

    •Convert your M.2 SATA SSD to a 2.5" SSD form factor, 9.5mm in height
    •Exact same dimensions, port locations, and screw locations as a 2.5" SSD (9.5mm height)
    •Accepts any M.2 SATA SSD from 30mm to 80mm in length (2230 / 2242 / 2260 / 2280)
    •Enables hot-swap functionality for any M.2 SATA SSD
    •Supports full SATA III bandwidth specification of 6Gbps
    •100% tool-less and screw-less M.2 drive installation

    hdd_ssd_adapters

  • ToughArmor MB508SP-B
    ToughArmor MB508SP-B
    ToughArmor MB508SP-B
    Product FeaturesView All

    •Removable drive tray system for easy maintenance
    •Rugged heavy duty full-metal construction of all internal and external components
    •Perfect for rugged and industrial applications that must meet flammability requirements
    •Fits 8x 5-15mm 2.5” SATA/SAS hard drives or SSDs in 2x 5.25” external CD/DVD drive bays
    •Supports SATA 3.0 up to 6Gbps or SAS 3.0 up to 12Gbps (single channel)
    •Large 80mm cooling fan with high, low, and off settings for full control

    metal_tray_enclosures , minisas_hd_enclosures , high_density_enclosures ,compatible_525_enclosures

Advanced Product Search Menu
SUBMIT CLEAR CANCEL
Can’t find any suitable products? Submit your requestHERE
We use cookies in order to give you the best possible experience on our website   More Info
Understood