Ruggedized Removable Drive Enclosures
|Optional Certifications Available for ToughArmor MB924IP-B|
|TAA||Trade Agreements Act Compliance|
|UL||Safety Standard Certification|
|UL94||Flammability of Plastic Materials|
|FCC||Federal Communications Commission Compliance|
|Wide Temperature||MIL-STD-810H - Method 501.7 & 502.7|
Supports 24 x 2.5" SAS/SATA SSDs & HDDs, up to 7mm in height
Installs into 3 x standard external 5.25" bay
Transfer speed up to 12Gb/s for SAS drives & 6Gb/s for SATA drives
Powers 24 x 2.5" SAS/SATA drive through 6 x 15-pin SATA power connector
Connects 24 x 2.5” SAS/SATA drive through 6 x MiniSAS HD (SFF-8643) connector
Large 80mm cooling fan with three-mode fan speed control (high/low/off)
|•||Individual drive activity LED with three-mode brightness control (100%/50%/off)|
Removable EZ-Slide Nano tray for each drive maintenance
Anti-Vibration Technology (AVT) – creates a safe environment for drives
Active Power Technology (APT) – saves power by shutting the device when no drive is installed
Drive ID plugs are included to keep track of your drives
Eagle-hook tray latch securely holds the tray inside the enclosure
EMI Grounding – Protects SSDs from electrical damage
Supports SATA 15 pins power cables and MiniSAS HD cables with locking latch design
Industry-leading 5 years limited warranty with exceptional customer support
|Support Drive Size：||24 x 2.5" SSD/HDD|
|Compatible Drive Type：||SATA/single channel SAS (SAS host required)|
|Number of Drives：||24|
|Max Drive Height：||7mm|
|Drive Bay：||3 x external 5.25" drive bay|
|Host Interface：||6 x miniSAS HD (SFF-8643)|
|Power Input：||6 x 15 pin SATA power connector|
|Transfer Rate：||SATA 3.0 up to 6Gbps / SAS 3.0 up to 12Gbps (single channel)|
|Support HDD Capacity：||No limitation|
|Drive Cooling：||1 x 80 mm Fan|
|Structure / Material ：||Full metal|
|Support Hot-Swap ：||Yes|
|Product Dimension (L x H x W)：||146 x 126 x 157.5mm|
|Package Gross Weight：||2302g|
|Drive Activity LED Indication：||2569.5g|
|Package Gross Weight：||Drive power: solid green; HDD access: flashing green|
|Package Content：||Device, user manual, ID Plug, screws|
|SATA connector Insertion Cycles：||10,000|
|Operating Temperature：||0°C to 60°C (32°F to 140°F)|
|Storage Temperature：||-35°C to 70°C (-31°F to 158°F)|
|Compliance：||CE, RoHS, REACH|
|Warranty：||5 years limited warranty|
Compatible Drive Tray (Caddy):
Related Products Series:
Q: Does MB924IP-B support the new SATA 3.3 / SAS 3.0 Power Disable feature (PWDIS)?
A: The MB924IP-B does not support the SATA 3.3 / SAS 3.0 PWDIS feature. If you install the SATA/SAS HDD/SSD with PWDIS in MB924IP-B , the drive will not spin, and the system won't detect the drive. See the list below for known SATA/SAS HDD/SSD with the PWDIS feature.
While we recommend to avoid using the SATA/SAS HDD/SSD with PWDIS, you can use the methods below to disable the PWDIS feature physically if you already purchased the drive:
Method 1 – Using the Molex to SATA adapter or cable to disconnect the power to Pin 3 of the SATA power connector.
|Molex to SATA Adapter||Molex to SATA Cable|
Method 2 – Placing Kapton tape on Pin 1-3 of the SATA/SAS power connector to isolate the 3.3V power, as shown below.
Please contact firstname.lastname@example.org if the problem persists.
Q: The mounting screws for the device seem to be too short to secure the device onto my system, what should I do?
A: For computer cases that have a thick metal sheet, the included mounting screws (M3*2.5L) may not fully secure the device. Please use longer screws (M3*4L) to secure the device or contact us at email@example.com for replacement screws.
Wendell from Level1Tech showcases how to utilize the 5.25” of your computer system with our latest SATA and NVMe products and build the ultimate home server.
Check out this new video from Level1Tech on our ToughArmor MB924IP-B and how it can be used for Chia Mining.