•Supports 1x U.2/U.3 NVMe SSD (5mm to 15mm height)
•Designed for external 3.5” drive bays
•PCIe 5.0 up to 128Gb/s transfer speed via MCIO 4i interface
•Hot-swappable removable tray for quick drive access
•Secure locking system (Eagle-hook + 2-segment key lock)
•Built-in 25mm cooling fan & passive heat dissipation design

metal_tray_enclosures,nvme_enclosures,tool-less_tray_enclosures

•Supports 6x U.2/U.3 PCIe NVMe SSD, with a 7mm height
•Designed to fit into any standard external 5.25" optical drive bay
•Utilizes 3x slimSAS 8i (SFF-8654) to support 6x U.2/U.3 SSDs
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more)
•Ruggedized full-metal enclosure that meets flammability requirements

nvme_enclosures metal_tray_enclosures

•Fits 1x 2.5" U.2/U.3 NVMe SSDs with a 7mm height
•Compatible with PCIe 4.0 x4/ x8 /x16 Slot
•Supports PCIe Gen 4.0 x 4 speed up to 64Gbps
•Supports drive hot-plug without requiring the system to be powered down
•Active Power Technology (APT) – drive activity LED only powers up if there is a drive installed in the bay
•Optional 2-pin drive activity signal output - allows for easy transfer of the drive activity signal to the front of the computer case

nvme_enclosures,metal_tray_enclosures

•Supports 2x 2.5-inch U.2/U.3 PCIe NVMe SSD, up to 15mm drive height
•Installs into any standard external 5.25-inch optical drive bay
•Uses 1x Slimline SAS (SFF-8654-8i) connector
•Uses a single 15-pin SATA power cable
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Removable EZ Slide Mini drive tray system for easy maintenance

nvme_enclosures,metal_tray_enclosures

•Supports 4x PCIe NVMe U.2/U.3 SSD, up to 15mm drive height
•Installs into any standard external 5.25" optical drive bay
•Uses 4x OCuLink (SFF-8612) to connect, pin-out defined by SFF-9402 Rev 1.1
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more)
•Ruggedized full-metal enclosure meeting flammability requirements

metal_tray_enclosures,nvme_enclosures

•Fits 2x 2.5" U.2/U.3 NVMe SSDs with a 7mm height
•Installs into standardized external 3.5” device bay (floppy bay)
•Uses 2x Slimline SAS (SFF-8654 4i) connector, pinout defined by SFF-9402 Rev 1.1
•Supports NVMe 4.0 64Gbps transfer rates per drive bay
•Ruggedized full-metal enclosure and drive trays
•2-segment key lock for additional physical security

nvme_enclosures metal_tray_enclosures

•Supports 1x 2.5" U.2 NVMe PCIe 3.0/4.0 SSD (up to 15mm drive height)
•Uses 1x Slimline SAS (SFF-8654) connector, pin-out defined by SFF-9402 Rev 1.1
•Fits in 1x external 3.5" drive bay
•Compliant with PCIe 3.0/4.0 up to 64Gbps transfer speeds
•Heavy-Duty full-metal chassis with industrial-grade ABS plastic
•Door-less and tray-less design for a quick bare drive swap

nvme_enclosures

•Supports 4x PCIe NVMe U.2 SSD, up to 15mm drive height
•Installs into any standard external 5.25" optical drive bay
•Uses 4x OCuLink (SFF-8612) to connect, pin-out defined by SFF-9402 Rev 1.1
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Ruggedized full-metal enclosure meeting flammability requirements
•Removable tray system for easy maintenance

metal_tray_enclosures, nvme_enclosures

•Fits 1x 2.5” U.2 NVMe SSD or 2.5" SAS / SATA SSD
(NVMe U.2 host is required to accept NVMe SSD, SAS or SATA SSD)
•Installs into any standard external 3.5” device bay or floppy bay
•Uses an U.2 port (SFF-8639) to connect, requires NVMe host
•Supports the full NVMe bandwidth specification of 64 Gbps
•Ruggedized full-metal enclosure meeting flammability requirements
•2-segment key lock for additional physical security

nvme_enclosures,metal_tray_enclosures

•Convert your M.2 NVMe SSD into the 2.5” U.2 NVMe form factor with 9.5mm height
•Exact same dimensions, port locations, and screw-hole locations as a standard U.2 drive
•Accepts any M.2 PCIe NVMe SSD from 30mm to 80mm in length
•Enables hot-plug functionality for any M.2 PCIe NVMe SSD
•10,000 insertion/removal cycle rated U.2 connector
•Supports full Nvme bandwidth specification of 64Gbps

hdd_ssd_adapters

•Perfect for rugged applications and complies to flammability requirements
•Fits 4 x 2.5” U.2 NVMe SSD
(NVMe U.2 host is required to accept NVMe SSD)
•Supports NVMe 64Gb/s transfer rate
•Fits any external 5.25” drive bay
•Dual 40mm fans keep your drives from overheating
•Requires only 2 x 15pin power connectors to power all 4 bays
•Drive label plugs to keep track of your RAID drives

metal_tray_enclosures,nvme_enclosures , minisas_hd_enclosures