|•||5 in 3 RAID backplane module|
|•||Fits five 3.5" SATA I / II / III (SATA 6Gbps) hard drives in three external 5.25" device bay & fully supports SATA Hot-Swap function|
|•||Supports SATA 3.0 up to 6Gbps / SAS 3.0 single channel up to 12Gbps|
|•||Large 92mm cooling fan with full metal body for excellent heat dissipation for the most intense applications|
|•||Compact and space saving to fit multiple drives|
|•||Interchangeable EZ-Tray tray design for internal drive security, exchangeability, expandability and maintenance capabilities. Compatible with DataCage Classic MB45X, ICYBento MB559 & ICYCube MB561 series|
|•||Enhanced Direct Air Flow Design – Shuts off most vents while adding larger ventilation slots on the backplane PCB|
|•||Uses SATA 15 power ports for best compatibility with the newest power supplies|
|•||Individual LED hard drive power & activity status notification|
|•||Active Power Technology (APT) - individual led & cooling fan only powers up if there is a drive installed in the bay|
|•||3 Mode Fan Speed Jumper of high / low / off (100%, 60%, 0%)|
|•||Fully Modularized rear outtake cooling fan for easy maintenance or aftermarket replacement with 2 and 3 pin power ports available|
|•||ICY DOCK 3 year warranty equivalent to hard drive manufacturer warranty to ensure maximum reliability and long life|
|Support Drive Size：||3.5” HDD|
|Compatible Drive Type：||SATA / Single channel SAS (SAS host required)|
|Number of Drives：||5|
|Max Drive Height：||26.1mm|
|Drive Bay：||3 x 5.25" device bay|
|Host Interface：||5 x 7pin SATA port|
|Power Input：||3 x 15pin SATA Power|
|Transfer Rate：||SATA 3.0 up to 6 Gbps / SAS 3.0 up to 12Gbps|
|Support HDD Capacity：||No Limitation|
|Drive Cooling：||92 x 92 x 25mm fan|
|Structure / Material：||Metal body with partial plastic|
|Product Dimension (L x W x H)：||200.4 x 146.4 x 125mm|
|Product Net Weight：||1610g|
|Package Gross Weight：||1970.5g|
|RAID Status LED Indicator：||N/A|
|Drive Activity LED Indication：||Drive power: solid green; HDD access: flashing green|
|Package contents：||1 - Device, 1 - user manual, 48 - screw|
|SATA Connector Insertion Rate：||10,000|
|OperatingTemperature：||0°C to 60°C (32°F to 140°F)|
|Storage Temperature：||-35°C to 70°C (-31°F to 158°F)|
|Compliance：||CE, RoHS, REACH|
Related Products Series:
Q: Does MB155SP-B support the new SATA 3.3 Power Disable feature (PWDIS)?
A: The MB155SP-B does not support the SATA 3.3 PWDIS feature. If you install the SATA HDD/SSD with PWDIS in MB155SP-B , the drive will not spin, and the system won't detect the drive. See the list below for known SATA HDD/SSD with the PWDIS feature.
Known SATA HDD/SSD with Power Disable Feature (PWDIS)
|WD||Ultrastar DC HC510
|Ultrastar DC HC520
Note: the SAS hard drive or SSD does not use the Pin 3 of SATA power connector for PWDIS feature and compatible with MB155SP-B .
While we recommend to avoid using the SATA HDD/SSD with PWDIS, you can use the methods below to disable the PWDIS feature physically if you already purchased the drive:
Method 1 – Using the Molex to SATA adapter or cable to disconnect the power to Pin 3 of the SATA power connector.
|Molex to SATA Adapter||Molex to SATA Cable|
Method 2 – Placing Kapton tape on Pin 1-3 of the SATA power connector to isolate the 3.3V power, as shown below.
Please contact firstname.lastname@example.org if the problem persists.