|•||Supports 4x 2.5" SAS/SATA HDDs/SSDs (up to 9.5mm drive height)|
|•||Install into any standard external 5.25" drive bay|
|•||Supports SATA 6Gbp/s transfer speeds & SAS up to 12Gbp/s (SAS host required)|
|•||Tray-less and door-less design for hot-swapping bare drives without tools or screws|
|•||Reduce cable clutter by using a single 15-pin SATA power connection to power four drives|
|•||Soft blue drive activity LED for each drive (Solid blue for power and flashing blue for drive activity)|
|•||Supports SATA 7-pin data and 15-pin power cables with a locking latch design|
|•||Industry-leading 3-year warranty against all defects|
|•||Active Power Technology (APT) - only powers up if there is a drive inserted into the drive bay|
|•||More than 100 ventilation holes are strategically placed throughout the enclosure for maximum passive cooling effect|
|•||Complimentary support from professionally trained technical support agents|
|Support Drive Size：||2.5" SSD/HDD|
|Compatible Drive Type：||SAS(Single Channel)/SATA SSD/HDD|
|Number of Drives：||4|
|Max Drive Height：||9.5mm|
|Drive Bay：||1 x External 5.25" Drive Bay|
|Host Interface：||4 x SATA 7 Pin|
|Power Input：||1 x SATA 15 Pin|
|Transfer Rate：||SATA 3.0 Up to 6 Gbps / SAS 3.0 Up to 12 Gbps|
|Support SSD Capacity：||No limitation|
|Drive Cooling：||Metal heat dispersion with passive cooling|
|Structure / Material：||Metal with plastic|
|Product Dimension (W x H x L)：||41.3 X 99.1 X 146mm|
|Product Net Weight：||222.2g|
|Package Gross Weight：||289.8g|
|Drive Activity LED Indication：||Drive power : solid blue; drive access: flashing blue|
|Package contents：||Device, user manual, screw|
|SATA Connector Insertion Rate：||10,000|
|Operating Temperature：||0°C to 60°C (32°F to 140°F)|
|Storage Temperature：||-35°C to 70°C (-31°F to 158°F)|
|Compliance：||CE, RoHS, REACH|
Related Products Series:
Q: Does MB024SP-B support the new SATA 3.3 / SAS 3.0 Power Disable feature (PWDIS)?
A: The MB024SP-B does not support the SATA 3.3 / SAS 3.0 PWDIS feature. If you install the SATA/SAS HDD/SSD with PWDIS in MB024SP-B , the drive will not spin, and the system won't detect the drive. See the list below for known SATA/SAS HDD/SSD with the PWDIS feature.
While we recommend to avoid using the SATA/SAS HDD/SSD with PWDIS, you can use the methods below to disable the PWDIS feature physically if you already purchased the drive:
Method 1 – Using the Molex to SATA adapter or cable to disconnect the power to Pin 3 of the SATA power connector.
|Molex to SATA Adapter||Molex to SATA Cable|
Method 2 – Placing Kapton tape on Pin 1-3 of the SATA/SAS power connector to isolate the 3.3V power, as shown below.
Please contact email@example.com if the problem persists.
Q: The mounting screws for the device seem to be too short to secure the device onto my system, what should I do?
A: For computer cases that have a thick metal sheet, the included mounting screws (M3*2.5L) may not fully secure the device. Please use longer screws (M3*4L) to secure the device or contact us at firstname.lastname@example.org for replacement screws.
BuildorBuy introduces our brand new flexiDOCK MB024SP-B. This provides an efficient and simple hot-swap solution when frequent swaps are required in a single 5.25” bay.
By Hardware Haven
Thanks to Colten from Hardware Haven for showcasing the FlexiDOCK MB024SP-B, 4-bay SAS/SATA 5.25 enclosure, in his new Proxmox Home Server Walk-Through video.