•Fits 1 x M.2 PCIe NVMe SSD with all drive length including 2230 (30mm), 2242 (42mm), 2260 (60mm), 2280 (80mm), and 22110 (110mm)
•Use 1 x PCIe 3.0/4.0 x4 interface, also supports installation into PCIe 4.0 x8 and x16 slots
•Install into a single-width full-height expansion slot
Optional screw holes available for low profile PCIe bracket (not included)
•Low profile design allows for multiple bays to be installed side-by-side in a modular design
•Tool-less drive installation design for easy drive maintenance and system upgrading
•Active Power Technology (APT) saves power by shutting the device down when no drive is installed

hdd_ssd_adapters/span>

•Fits 1 x M.2 PCIe NVMe SSD with all drive length including 2230 (30mm), 2242 (42mm), 2260 (60mm), 2280 (80mm), and 22110 (110mm)
•Use 1 x PCIe 3.0/4.0 x4 interface, also supports installation into PCIe 4.0 x8, and x16 slots
•Install into a single-width full-height expansion slot
Optional screw holes available for low profile PCIe bracket (not included)
•Low profile design allows for multiple bays to be installed side-by-side in a modular design
•Integrated heat sink and ample ventilation for excellent passive cooling
•Tool-less drive installation design for easy drive maintenance and system upgrading

hdd_ssd_adapters

•Fits 1 x M.2 PCIe NVMe SSD with all drive length including 2230 (30mm), 2242 (42mm), 2260 (60mm), 2280 (80mm), and 22110 (110mm)
•Use 1 x PCIe 3.0/4.0 x4 interface, also supports installation into PCIe 4.0 x8, and x16 slots
•Install into a single-width full-height expansion slot
Optional screw holes available for low profile PCIe bracket (not included)
•Low profile design allows for multiple bays to be installed side-by-side in a modular design
•Integrated heat sink and ample ventilation for excellent passive cooling
•Tool-less drive installation design for easy drive maintenance and system upgrading

hdd_ssd_adapters

•Convert your M.2 NVMe SSD into the 2.5” U.2 NVMe form factor with 9.5mm height
•Exact same dimensions, port locations, and screw-hole locations as a standard U.2 drive
•Accepts any M.2 PCIe NVMe SSD from 30mm to 80mm in length
•Enables hot-plug functionality for any M.2 PCIe NVMe SSD
•10,000 insertion/removal cycle rated U.2 connector
•Supports full Nvme bandwidth specification of 64Gbps

hdd_ssd_adapters

•Convert your M.2 SATA SSD to a 2.5" SSD form factor, 9.5mm in height
•Exact same dimensions, port locations, and screw locations as a 2.5" SSD (9.5mm height)
•Accepts any M.2 SATA SSD from 30mm to 80mm in length (2230 / 2242 / 2260 / 2280)
•Enables hot-swap functionality for any M.2 SATA SSD
•Supports full SATA III bandwidth specification of 6Gbps
•100% tool-less and screw-less M.2 drive installation

hdd_ssd_adapters

•Fully SATA 3.0 Revision (6Gb/s) compatible and Backward compatible with SATA 2.0 Revision (3Gb/s) and 1.0 Revision (1.5Gb/s) drives
•Supports SATA hot-swap function
•Converts 2 x 5mm to 9.5mm 2.5” SATA HDD or SSD into a 3.5” SATA hard drive
•Exact same dimension, screw holes and connector locations as 3.5” hard disk drive
•Built-in hardware RAID controller allows four different configurations: RAID 0 (FAST), RAID 1 (SAFE), JBOD and BIG (SPANNING)
•Patented tool-less drive installation design let you add / remove drives without dismount the converter

hdd_ssd_adapters

•Converts 2.5” SATA HDD or SSD to 3.5” SATA hard drive form factor
•Supports 2.5” SAS HDD w/ single channel SAS functions (requires SAS host)
•Fully SATA 3.0 Revision (6Gb/s) compatible and Backward compatible with
•Fully SATA 3.0 Revision (6Gb/s) compatible and Backward compatible with SATA 2.0 Revision (3Gb/s) and 1.0 Revision (1.5Gb/s) drives
•Supports SATA 6 Gbps or SAS 12Gbps (single channel)
•Heavy duty stain-less steel exterior helps heat dissipation

hdd_ssd_adapters

•Converts 2.5” SATA HDD or SSD to 3.5” SATA hard drive
•Supports 2.5” SAS HDD w/ single channel SAS functions (requires SAS host)
•Heavy duty stain-less steel exterior with easy access to drives
•Fully SATA 3.0 Revision (6Gb/s) compatible and Backward compatible with SATA 2.0 Revision (3Gb/s) and 1.0 Revision (1.5Gb/s) drives
•Support SATA 6Gbps or SAS 3.0 12Gbps (Single channel)
•Open air design for rapid heat dissipation

•Featuring EZ-Fit design for anti-shock and the best drive fit
•Open air design with all around airflow vents for maximum air flow
•Completely tool-less drive installation for quick & easy setup
•Converts your 2.5” SATA HDD or SSD into an exact 3.5” SATA hard drive form factor
•Supports 2.5” SAS HDD/SSD with single channel SAS functions (requires SAS host)
•Supports SATA 6Gbps or SAS single channel

hdd_ssd_adapters

•Converts your 2.5” SATA HDD or SSD to a 3.5” SATA hard drive, for 3.5” SATA drive bay usage
•Support SATA 6Gbps or SAS 3.0 12Gbps (single channel)
•Compatible with Most 3.5” HDD Backplanes and Hot Swap Devices
•Universal mounting holes for most common PC case
•Screw-less design for quick & easy installation
•Airflow vents for heat dissipation with shockproof design

hdd_ssd_adapters

•Converts your 2.5" SATA HDD or SSD to a 3.5” SATA hard drive, for 3.5" SATA drive bay usage
•Support SATA 6Gbps or SAS 3.0 12Gbps (Single channel)
•Accepts 2.5" HDD/SDD (7mm-9.5mm in height)
•Compatible with Most 3.5” HDD Backplanes and Hot Swap Devices
•Universal mounting holes for most common PC case
•Screw-less design for quick & easy hard drive installation

hdd_ssd_adapters

•Converts your 2.5” SATA HDD or SSD to a 3.5” SATA HDD or SSD, for 3.5” SATA drive bay usage
•Compatible with Most 3.5” SATA HDD Backplanes, Rackmounts and Hot Swap Devices •Designed for System Integrators and IT Professionals
•Screw-less Design For Quick & Easy Installation
•Full Metal and Heavy Duty with Easy Access to Drives
•Compatible with 7, 9.5, 12.5 & 15mm height drives

hdd_ssd_adapters