• Ultra-compact, non-standard module size tailored for rackmount system integrators
• Supports 2 × 7mm to 15mm U.2/U.3 NVMe SSDs
• PCIe 5.0 x4 per drive, up to 128Gbps
• MCIO 8i (SFF-TA-1016) interface
• Uses MB991TRAY-B full-metal removable trays
• Full-metal ToughArmor construction for industrial durability

•Supports 8 x 15mm / 9.5mm E1.S SSDs in a single 5.25" bay.
•PCIe Gen 5.0 x4 interface — up to 128Gbps per drive.
•Complies with UBM (SFF-TA-1005) backplane management standard.
•4 x MCIO 8i connectors support PCIe bifurcation (x4/x2/x1).
•Compatible with Broadcom, HighPoint, Areca, and other HBA/RAID cards.
•Supports Hot-Plug drive swapping.

Compatible M.2 SSD Tray (caddy) for ICY DOCK ExpressSlot MB305/MB312 series mobile rack enclosures.

Compatible M.2 SSD Tray (caddy) for ICY DOCK ExpressSlot MB204MP series mobile rack enclosures.

•Converts 5.9mm or 8.01mm E1.S SSDs to 9.5mm E1.S mechanical form factor
•Converts 5.9mm or 8.01mm E1.S SSDs to 9.5mm E1.S mechanical form factor
•Fully compatible with standard 9.5mm E1.S trays, tool-less carriers, and hot-swap drive bays
•Full-metal construction enhances protection and passive cooling
•Includes both thin and thick thermal pads for optimal heat transfer
•Tool-less SSD installation

•Fits 1 x 2.5" U.2/U.3 NVMe SSD (up to 15mm height) into a standard 3.5" external drive bay)
•Supports PCIe Gen 4.0 U.2 interface via SFF-8639 connector (up to 64Gbps transfer rate))
•Water-resistant front cover protects against dust and splashes)
•2-segment security keylock prevents unauthorized access and accidental drive ejection)
•Removable drive tray for easy maintenance and hot-swap (NVMe host must support hot-swap))

sas_sata_enclosures,tool-less_tray_enclosures,high_density_enclosures

• Supports up to 4 x 2.5" SATA/SAS HDDs or SSDs into a single 5.25" bay
• Compatible with SATA 6Gbps or SAS 3.0 12Gbps (Single channel)
• Hot-swappable bays for quick and convenient drive replacement
• Accommodates 2.5" drives with 5mm, 7mm, 9.5mm, and 12.5mm Height
• Active Power Technology (APT) - only powers up if there is drive installed in the drive bay
• ExpressTray system: tool-less, removable trays designed for easy installation while maintaining the stability of tray-based designs
• Optional bottom-mounted screw holes for enhanced drive stability

• Supports up to 6 x 2.5" SATA/SAS HDDs or SSDs into a single 5.25" bay
• Compatible with SATA 6Gbps or SAS 3.0 12Gbps (Single channel)
• Hot-swappable bays for quick and convenient drive replacement
• Accommodates 2.5" drives with 5mm, 7mm, and 9.5mm Height
• Active Power Technology (APT) - only powers up if there is drive installed in the drive bay
• ExpressTray system: tool-less, removable trays designed for easy installation while maintaining the stability of tray-based designs
• Optional bottom-mounted screw holes for enhanced drive stability

• Fits 8× 7mm U.2/U.3 NVMe SSDs into a single external 5.25" device bay
• PCIe 4.0 x4 interface per drive, up to 64Gbps (host dependent)
• Compatible with Tri-mode HBA/RAID cards (NVMe mode only)
• 4× SlimSAS 8i (SFF-8654) host connectors (2 drives per connector)
• Full-metal construction for maximum durability and heat dissipation
• Dual 40×40×20mm fans with optimized airflow design

•Designed for Intel motherboards with x8/x8 and x8/x4/x4 PCIe bifurcation settings
•Fits 2x M.2 PCIe NVMe SSD from 30-110mm (2230, 2243, 2260, 2280, 22110)
•Uses 1x PCIe 5.0 x16 slot (PCIe Bifurcation is required to access both drives)
•Installs to a single-width full-height PCIe express slot
•Removable drive tray with tool-less drive installation for easy drive maintenance
•Eagle-hook lock system keeps the drive secured in the enclosure

•SlimSAS 4i Connectivity: Delivers PCIe 4.0 x4 performance with data transfer rates up to 64Gbps
•Supports 1 x M.2 PCIe NVMe SSD in 2230, 2242, 2260, and 2280 form factors
•Install into a single-width full-height or half-height PCIe expansion slot
•Tool-less removable M.2 NVMe SSD tray for quick and easy SSD maintenance
•Quick release knob for fast SSD tray removal and installation
•Aluminum heatsink lid and included thermal pad for optimal heat dissipation

•Dual-lock design: Metal barrel key + thumbscrew lock
•Fits 1 x U.2/U.3 NVMe SSD in a 3.5” external bay (up to 15mm height)
•PCIe 5.0 interface supports up to 128Gbps transfer rates
•Hot-swappable drive tray enables tool-free SSD maintenance
•Full-metal rugged enclosure meets flammability and durability demands

metal_tray_enclosures,nvme_enclosures,tool-less_tray_enclosures,tool-less_tray_enclosures

• Supports 4 x U.2/U.3 PCIe 4.0 NVMe SSDs (up to 15mm height) in a single 5.25” drive bay
• Ideal for building high-speed NVMe RAID arrays or expanding flash capacity in space-limited systems
• Compatible with tri-mode HBA/RAID cards via 2 x SlimSAS 8i (SFF-8654) connectors
• PCIe 8-Pin power input ensures stable high-current delivery with cleaner cable management
• ExpressTray system supports tool-less SSD installation with optional screw mounting
• Dual 40x40x20mm fans for superior active airflow

•IPX5 water-resistant cover
•Fits 4x PCIe NVMe U.2/U.3 SSD, up to 15mm drive height
•Installs into any standard external 5.25" optical drive bay
•Uses 2x MCIO (SFF-TA-1016 8i) to connect
•Supports PCIe 5.0 specification with transfer rates up to 128Gb/s per drive bay
•Removable tray system for easy maintenance

• Fits in a single external 3.5" device (floppy) bay
• Supports 1× U.2/U.3 NVMe SSD (7mm or 15mm height; bay supports up to 15mm)
• PCIe 4.0 x4 interface supports up to 64Gbps transfer speeds (host dependent)
• ExpressTray with tool-less SSD installation and optional screw mounting for added stability
• Compatible with onboard NVMe ports or M.2-to-U.2 adapters without occupying PCIe slots
• Easy-access drive ejection button for quick removal

•Supports 1x U.2/U.3 NVMe SSD (5mm to 15mm height)
•Designed for external 3.5” drive bays
•PCIe 5.0 up to 128Gb/s transfer speed via MCIO 4i interface
•Hot-swappable removable tray for quick drive access
•Secure locking system (Eagle-hook + 2-segment key lock)
•Built-in 25mm cooling fan & passive heat dissipation design

metal_tray_enclosures,nvme_enclosures,tool-less_tray_enclosures Interface_SlimSAS4i

• Hot-swappable drive support
• Fits 4× U.2/U.3 NVMe SSDs (5–15mm) into a single external 5.25" bay
• Supports PCIe 5.0 with transfer rates up to 128Gbps per SSD
• Host Interface: 2× MCIO 8i (SFF-TA-1016) connectors for simplified cabling
• Power Input: Dual 4-pin Molex connectors for secure and reliable power delivery
• Removable all-metal EZ-Slide Mini trays (MB991TRAY-B) for easy maintenance
• Lightweight aluminum housing improves cooling efficiency and reduces weight

•Supports 4 x 7.5mm E3.S NVMe SSDs
•Fits into a single external 5.25" optical drive bays
•Connects via 2 x MCIO 8i (SFF-TA-1016 8i) interfaces
•Supports NVMe hot-plug function (requires hot-plug support from both host and SSD)
•Complies with PCIe 5.0 specifications, offering transfer rates up to 128Gbps per drive bay
•Durable, full-metal enclosure meets flammability standards
•Equipped with dual high-performance 40 x 40 x 20mm cooling fans
•Removable drive tray design for easy drive maintenance
•Active Power Technology - Saves power by shutting off the enclosure when no drive is installed
•EMI Grounding - Protects SSDs from electrical damage
•Eagle-hook tray latch - Securely holds the drive tray inside the enclosure

•Supports 12 x 7.5mm E3.S NVMe SSDs
•Fits into 2 x standard external 5.25" optical drive bays
•Connects via 6 x MCIO 8i (SFF-TA-1016 8i) interfaces
•Supports NVMe hot-plug function (requires hot-plug support from both host and SSD)
•Complies with PCIe 5.0 specifications, offering transfer rates up to 128Gbps per drive bay

Compatible 2.5" drive tray (caddy) for ICY DOCK ExpressCage MB038SP-B mobile rack enclosures.

•Fits 2x M.2 PCIe NVMe SSD with all drive length including 2230 (30mm), 2242 (42mm), 2260 (60mm), 2280 (80mm), and 22110 (110mm)
•PCIe 5.0 x8 interface (backward compatible with PCIe 4.0/3.0) *PCIe Bifurcation x4, x4 for PCIe 8x, or x4, x4, x4, x4 for PCIe 16x is required to access both drives
•Removable drive tray with tool-less drive installation design for easy drive maintenance
•Compact design, allowing multiple bays to be installed side by side
•Eagle-hook locking system secures the drive in place
•EMI grounding technology protects SSDs from static damage

metal_tray_enclosures,nvme_enclosures,tool-less_tray_enclosures

•Fits 1x M.2 PCIe NVMe SSD with all drive length including 2230 (30mm), 2242 (42mm), 2260 (60mm), 2280 (80mm), and 22110 (110mm)
•PCIe 5.0 x4 interface (backward compatible with PCIe 4.0/3.0)
•Fits into full-height & half-height PCIe expansion slots
•Removable drive tray with tool-less drive installation design for easy drive maintenance
•Compact design, allowing multiple bays to be installed side by side
•Eagle-hook locking system secures the drive in place

metal_tray_enclosures,nvme_enclosures,high_density_enclosures

•Supports PCIe 4.0 x8 up to 64Gbps transfer speeds
•Supports 2 x M.2 PCIe NVMe SSD (30-80mm length) in 2230, 2242, 2260, and 2280 form factors
•PCIe 4.0 x8 interface, also compatible with x16 slots
•Slim, single-width full-height PCIe expansion slot design
•Tool-less removable M.2 NVMe SSD trays for quick and easy SSD maintenance
•Quick release knob for fast SSD tray removal and installation

nvme_enclosures,tool-less_tray_enclosures,high_density_enclosures

•Supports PCIe 4.0 x4 up to 64Gbps transfer speeds
•Supports 1 x M.2 PCIe NVMe SSD (30-80mm length) in 2230, 2242, 2260, and 2280 form factors
•PCIe 4.0 x4 interface, also compatible with x8 and x16 slots
•Install into a single-width full-height or half-height PCIe expansion slot
•Tool-less removable M.2 NVMe SSD tray for quick and easy SSD maintenance
•Quick release knob for fast SSD tray removal and installation

• Converts a 9.5 mm Ultra-Slim ODD bay into a removable U.2/U.3 SSD bay
• Supports 1× U.2/U.3 NVMe SSD (up to 7 mm height)
• OCuLink 4i (SFF-8612) interface, PCIe Gen 4 x4, up to 64 Gbps
• EZ-Slide Slim tray for fast SSD maintenance
• Lightweight one-piece aluminum tray for durability and heat transfer
• Eagle-hook front latch prevents accidental tray ejection

•Converts M.2 NVMe (PCIe Gen 4 x4) slot into SlimSAS 4i output
•Fully compatible with ICY DOCK SlimSAS mobile racks & cables
•Built-in PCIe Gen 4.0 redriver ensures high-speed signal over long cables
•100MHz clock buffer, SMBus repeater, and power signal gates for robust system integration
•Supports transfer rates up to 64Gbps
•Ideal for removable storage workflows in workstations, servers, edge AI systems, and industrial PCs

nvme_enclosures

• 2 x SlimSAS 8i (SFF-8654) ports, compliant with SFF-9402 Rev 1.1
• PCIe 4.0 x16 interface supporting up to 256Gbps total bandwidth
• Integrated redriver IC for long-reach, high-integrity PCIe Gen4 NVMe signaling
• 100MHz PCIe clock buffer for stable enterprise timing
• Requires motherboard PCIe bifurcation (x4, x4, x4, x4) to access four SSDs (This adapter card itself does not perform bifurcation)
• Validated compatibility with ICY DOCK NVMe mobile racks and cables

• Fits 8 × 15 mm U.2/U.3 NVMe SSDs in 2 × 5.25" drive bays
• 4 × MCIO 8i (SFF-TA-1016) connectors support PCIe Gen5 x4 per drive
• Tri-Mode HBA/RAID card compatible (NVMe mode only)
• Delivers up to 128 Gbps aggregate bandwidth
• Hot-swappable EZ-Slide trays for fast maintenance and secure data mobility
• Supports U.2/U.3 SSD heights from 7 mm to 15 mm (ready for 5 mm and 9.5 mm future standards)

•Fits 2x E3.S NVMe SSDs up to 7.5mm height
•Installs into standardized external 3.5” device bay (floppy bay)
•Uses a MCIO 8i connector, supporting PCIe 5.0 x4 with transfer speeds up to 128GB/s
•Supports hot-plug functionality for E3.S SSD (dependent on host environment)
•Comes equipped with a 25mm fan, which can be replaced without disassembling the entire unit
•Ruggedized full-metal enclosure and drive trays

•Accommodates 8x U.2/U.3 PCIe NVMe SSDs, supporting a maximum drive height of 7mm.
•Fits any standard external 5.25" optical drive bay.
•Utilizes 4x MCIO 8i (SFF-TA-1016 8i) connectors for 8x U.2/U.3 SSDs.
•Delivers PCIe 5.0 speeds with transfer rates up to 128Gb/s per drive bay.
•Compatible with Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more).
•Rugged full-metal enclosure meeting flammability standards.
•Removable tray system for simplified maintenance.

•IPX6 water-resistant cover
•Dual lock system – Metal barrel lock + thumb screw lock
•Fits 1 x 5 to 15mm height 2.5” SAS/SATA HDD/SSD in external 3.5” drive bay
•Supports SATA 6Gbps or SAS 3,0 12Gbps (single channel)
•Removable, hot-swappable drive caddy for easy drive maintenance

metal_tray_enclosures,nvme_enclosures,tool-less_tray_enclosures,tool-less_tray_enclosures

•Supports RAID 0 / 1 / JBOD / BIG
•Uses 1x PCIe 3.0/4.0 x8 or x16 slot (PCIe Bifurcation x4, x4, x4, x4 for PCIe 16x and x4, x4 for PCIe 8x is required to access both drives)
•Adapts two 9.5mm height E1.S SSDs within a single PCIe slot space
•Single slot, full-height 3/4 length card specifications
•Includes a 50mm frameless fan for effective heat dissipation
•Sealed space design for maximized cooling efficiency
•Removable SSD caddy design for quick drive maintenance and replacements

•Fits into any 5.25" optical drive bay in computer cases or rackmount setups.
•Accommodates up to 8x 2.5" U.2/U.3 NVMe SSDs, supporting drives up to 7mm in height.
•Utilizes 4x MCIO 8i connectors, providing PCIe 5.0 x4 lanes with data transfer speeds up to 128GB/s.
•Removable drive caddy designed for tool-free, screw-less SSD installation and removal, allowing eight drives to be swapped simultaneously with ease.
•Dual 40x40x20mm fans for optimal airflow; fans are user-replaceable without disassembling the unit.
•Compatible with hot-swapping functionality for U.2/U.3 NVMe SSDs (host system must support hot-plug).
•Green LED indicators provide clear visual status for drive power and read/write activity.

•Fits 1 x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Adjustable drive locker holds all length drives securely
•Tool-less drive installation design for easy drive maintenance and system upgrading
•Installs into any standard external 3.5” device bay or floppy bay
•Uses a SlimSAS 4i (SFF-8654) to connect, requires NVMe host
•Supports the full NVMe bandwidth specification of 64Gbps

metal_tray_enclosures,nvme_enclosures,tool-less_tray_enclosures Interface_SlimSAS4i

•Fits 2 x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Adjustable drive locker holds all length drives securely
•Tool-less drive installation design for easy drive maintenance and system upgrading
•Installs into any standard external 3.5” device bay or floppy bay
•Uses 2 x SlimSAS 4i (SFF-8654) to connect, requires NVMe host
•Supports the full NVMe bandwidth specification of 64Gbps

metal_tray_enclosures,nvme_enclosures,tool-less_tray_enclosures,tool-less_tray_enclosures

•Fits 4x M.2 PCIe NVMe SSD from 30-80mm (2230, 2242, 2260, 2280)
•Uses 1x PCIe 4.0 x16 slot (PCIe Bifurcation x4, x4, x4, x4 for PCIe 16x is required to access four drives)
•Installs to a single-width full-height PCIe express slot
•Removable drive tray with tool-less drive installation for easy drive maintenance
•Quick release knob design allows for fast and easy SSD removal and installation
•Fan on/off switch provides flexibility for systems with sufficient cooling or noise-sensitive environments

nvme_enclosures,tool-less_tray_enclosures,high_density_enclosures

•Designed for a 3.5" floppy bay in either a computer case or rackmount.
•Holds 2 x EDSFF E1.S NVMe SSDs (compatible with 9.5mm and 15mm heights).
•Uses a MCIO 8i connector, supporting PCIe 5.0 x4 with transfer speeds up to 128GB/s.
•Features a removable drive tray with tool-less SSD installation for user-friendly maintenance.
•Comes equipped with two 25mm fans, which can be replaced without disassembling the entire unit.
•Supports hot-swap functionality for EDSFF E1.S SSD (dependent on host environment).

•Accommodates 8 x M.2 NVMe SSD with drive lengths from 30mm to 80mm (2230 / 2242/ 2260 / 2280) in a single PCIe x16 expansion slot (Full-height, full-length)
• Featuring a Built-in PCIe Bifurcation Function, empowers users to access eight individual M.2 NVMe SSDs in systems that do not natively support PCIe Bifurcation
•Delivers unmatched transfer speeds of up to 128Gbps for each M.2 NVMe PCIe SSD.
•Effortless maintenance with removable drive trays featuring a tool-less design.
•Superior heat dissipation via integrated M.2 drive heat sinks and thermal pads.
•50mm blower fan ensuring optimal cooling for each M.2 NVMe SSD.

•Fits 4x M.2 PCIe NVMe SSD from 30-80mm (2230, 2243, 2260, 2280)
•Uses 1x PCIe 5.0 x16 slot (PCIe Bifurcation x4, x4, x4, x4 for PCIe x16 is required to access four drives)
•Installs to a single-width full-height PCIe express slot
•Removable drive tray with tool-less drive installation for easy drive maintenance
•Quick release knob design allows for fast and easy SSD removal and installation
•Fan on/off switch provides flexibility for systems with sufficient cooling or noise-sensitive environments

nvme_enclosures,tool-less_tray_enclosures,high_density_enclosures

•Supports 8 x PCIe M.2 NVMe SSDs of all lengths - 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Installs into 1 x standard external 5.25" optical drive bay
•Uses 8 x OCuLink (SFF - 8612) to connect, pin-out defined by SFF - 9402 Rev 1.1
•Supports PCIe 4.0 specifications with transfer rates up to 64Gbps per drive bay
•Powers 8 x M.2 SSDs through 2 x 15 - pin SATA power connectors
•Ruggedized full - metal enclosure meeting flammability requirements

nvme_enclosures,tool-less_tray_enclosures,high_density_enclosures Interface_SlimSAS4i

•Supports 2 x 2.5" SSD/HDD, from 5-15mm height
•Supports RAID 1 and JBOD modes
•Installs into any standard external 1 x 5.25" optical drive bay
•Supports up to 6 Gbps data transfer speed
•Built-In JMS562 hardware RAID chipset
•Easy-to-read RAID status LED indicators for drive power, access, fail, and RAID 1 rebuilding process

metal_tray_enclosures,sas_sata_enclosures,compatible_525_enclosures

•Accommodates up to 8 x 2.5" SAS/SATA HDDs/SSDs in a single 5.25" bay
•Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (single channel)
•Removable drive tray system for easy maintenance and hot-swap support
•Accommodates 2.5" drives with 5mm & 7mm height
•Active Power Technology (APT) - powers up only when a drive is installed in the bay
•Blue indicator LED provided for each bay

•Fits into any 5.25" optical drive bay in computer cases or rackmount setups
•Accommodates up to 4x 2.5" U.2/U.3 NVMe SSDs, supporting drives up to 15mm in height
•Utilizes 2x MCIO 8i connectors, providing PCIe 5.0 x4 lanes with data transfer speeds up to 128GB/s
•Drive caddy designed for tool-free, screw-less SSD installation and removal, allowing four drives to be swapped simultaneously with ease
•Dual 40x40x20mm fans for optimal airflow; fans are user-replaceable without disassembling the unit
•Compatible with hot-swapping functionality for U.2/U.3 NVMe SSDs (host system must support hot-swap)

•Fits 4x M.2 NVMe SSDs of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Installs into any standard external 5.25" optical drive bay
•Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more)
•Connects with 4x OCulink (SFF-8612) (NVMe host required)
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Patent-pending screw-less M.2 adjustable locker securely holds all length drives
metal_tray_enclosures,nvme_enclosures , sas_sata_enclosures,tool-less_tray_enclosures

•Supports 6x U.2/U.3 PCIe NVMe SSD, with a 7mm height
•Designed to fit into any standard external 5.25" optical drive bay
•Utilizes 3x slimSAS 8i (SFF-8654) to support 6x U.2/U.3 SSDs
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more)
•Ruggedized full-metal enclosure that meets flammability requirements

nvme_enclosures metal_tray_enclosures Interface_SlimSAS4i

•Fits 1x 2.5" U.2/U.3 NVMe SSDs with a 7mm height
•Compatible with PCIe 4.0 x4/ x8 /x16 Slot
•Supports PCIe Gen 4.0 x 4 speed up to 64Gbps
•Supports drive hot-plug without requiring the system to be powered down
•Active Power Technology (APT) – drive activity LED only powers up if there is a drive installed in the bay
•Optional 2-pin drive activity signal output - allows for easy transfer of the drive activity signal to the front of the computer case

nvme_enclosures,metal_tray_enclosures

•Fits 2 x E1.S NVMe SSD, compatible with 9.5mm thickness.
•Uses 1x PCIe 3.0/4.0 x8 or x16 slot (PCIe Bifurcation x4, x4, x4, x4 for PCIe 16x and x4, x4 for PCIe 8x is required to access both drives)
•Supports hot-swap/hot-plug E1.S NVMe SSD.
•Removable drive tray with tool-less drive installation for easy drive maintenance.
•The eagle-hook lock system keeps the drive secured in the enclosure.
•Equipped with a 50mm blower fan for maximum thermal performance.

•Supports 2 x 2.5" SSD/HDD or 3.5" SATA hard drive
•Supports RAID 1 and JBOD modes
•Installs into any standard external 2 x 5.25" optical drive bay
•Supports up to 6 Gbps data transfer speed
•Built-In JMS562 hardware RAID chipset
•Easy-to-read RAID status LED indicators for drive power, access, fail and RAID 1 rebuilding process

sas_sata_enclosures,drive_tray_enclosures

•Fits 2x M.2 PCIe NVMe SSD from 30-110mm (2230, 2243, 2260, 2280, 22110)
•Uses 1x PCIe 3.0/4.0 x8 or x16 slot (PCIe Bifurcation x4, x4, x4, x4 for PCIe 16x and x4, x4 for PCIe 8x is required to access both drives)
•Installs to a single-width full-height PCIe express slot
•Removable drive tray with tool-less drive installation for easy drive maintenance
•Eagle-hook lock system keeps the drive secured in the enclosure
•EMI- Grounding – protects the hard drive from electrical damage

metal_tray_enclosures,nvme_enclosures,high_density_enclosures

Compatible 2.5" drive tray (caddy) with metal lock for ICY DOCK ToughArmor MB516/MB924/MB998 series mobile rack enclosures.

Compatible 3.5" drive tray (caddy) for ICY DOCK MB122/MB123 series mobile rack enclosures.

•Supports 2x 2.5-inch U.2/U.3 PCIe NVMe SSD, up to 15mm drive height
•Installs into any standard external 5.25-inch optical drive bay
•Uses 1x Slimline SAS (SFF-8654-8i) connector
•Uses a single 15-pin SATA power cable
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Removable EZ Slide Mini drive tray system for easy maintenance

nvme_enclosures,metal_tray_enclosures Interface_SlimSAS4i

•Supports 4x PCIe NVMe U.2/U.3 SSD, up to 15mm drive height
•Installs into any standard external 5.25" optical drive bay
•Uses 4x OCuLink (SFF-8612) to connect, pin-out defined by SFF-9402 Rev 1.1
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more)
•Ruggedized full-metal enclosure meeting flammability requirements

metal_tray_enclosures,nvme_enclosures Interface_SlimSAS4i

•Fits 2x 2.5" U.2/U.3 NVMe SSDs with a 7mm height
•Installs into standardized external 3.5” device bay (floppy bay)
•Uses 2x Slimline SAS (SFF-8654 4i) connector, pinout defined by SFF-9402 Rev 1.1
•Supports NVMe 4.0 64Gbps transfer rates per drive bay
•Ruggedized full-metal enclosure and drive trays
•2-segment key lock for additional physical security

nvme_enclosures metal_tray_enclosures Interface_SlimSAS4i

•Fits in Standard 5.25" Drive Bay.
•Supports 8 x E1.S (EDSFF) NVMe SSDs (9.5mm/15mm height).
•Uses 4 x MCIO 8i (SFF-TA-1016 8i) port supports PCIe 5.0 x4 of up to 128Gbps data transfer rates.
•Ability to mix and match E1.S in a single enclosure.
•Supports tool-less drive installation for both E1.S NVMe SSDs.
•Equipped with dual 40mm detachable fans for superior cooling performance.

•Fits 4 x E1.S (EDSFF) NVMe SSD (9.5mm/15mm/25mm) in a 5.25" external drive bay.
•Uses 2 x MCIO 8i (SFF-TA-1016 8i) port supports PCIe 5.0x4 of up to 128Gbps data transfer rates.
•Full-metal housing and drive tray provide excellent durability and robustness - ideal for the enterprise-level data storage environment.
•Equipped with dual 40mm detachable fans for superior cooling performance.
•The Eagle-hook tray latch design securely holds the drive trays within the enclosure.
•Anti-Vibration (AVT) technology provides a stable and safe operating environment for SSDs.

•Supports 4x 2.5" SAS/SATA HDDs/SSDs (up to 9.5mm drive height)
•Install into any standard external 5.25" drive bay
•Supports SATA 6Gbp/s transfer speeds & SAS up to 12Gbp/s (SAS host required)
•Tray-less and door-less design for hot-swapping bare drives without tools or screws
•Reduce cable clutter by using a single 15-pin SATA power connection to power four drives
•Soft blue drive activity LED for each drive (Solid blue for power and flashing blue for drive activity)

sas_sata_enclosures,tray-less_enclosures

Compatible 2.5" drive tray (caddy) for ICY DOCK ExpressCage MB741SP-B/MB741V4P-B mobile rack enclosure.

•Fits 1 x M.2 PCIe NVMe SSD with all drive length including 2230 (30mm), 2242 (42mm), 2260 (60mm), 2280 (80mm), and 22110 (110mm)
•Use 1 x PCIe 3.0/4.0 x4 interface, also supports installation into PCIe 4.0 x8, and x16 slots
•Install into a single-width full-height expansion slot
Optional screw holes available for low profile PCIe bracket (not included)
•Low profile design allows for multiple bays to be installed side-by-side in a modular design
•Integrated heat sink and ample ventilation for excellent passive cooling
•Tool-less drive installation design for easy drive maintenance and system upgrading

hdd_ssd_adapters

•Fits 1 x M.2 PCIe NVMe SSD with all drive length including 2230 (30mm), 2242 (42mm), 2260 (60mm), 2280 (80mm), and 22110 (110mm)
•Use 1 x PCIe 3.0/4.0 x4 interface, also supports installation into PCIe 4.0 x8, and x16 slots
•Install into a single-width full-height expansion slot
Optional screw holes available for low profile PCIe bracket (not included)
•Low profile design allows for multiple bays to be installed side-by-side in a modular design
•Integrated heat sink and ample ventilation for excellent passive cooling
•Tool-less drive installation design for easy drive maintenance and system upgrading

hdd_ssd_adapters

•Fits 1 x M.2 PCIe NVMe SSD with all drive length including 2230 (30mm), 2242 (42mm), 2260 (60mm), 2280 (80mm), and 22110 (110mm)
•Use 1 x PCIe 3.0/4.0 x4 interface, also supports installation into PCIe 4.0 x8 and x16 slots
•Install into a single-width full-height expansion slot
Optional screw holes available for low profile PCIe bracket (not included)
•Low profile design allows for multiple bays to be installed side-by-side in a modular design
•Tool-less drive installation design for easy drive maintenance and system upgrading
•Active Power Technology (APT) saves power by shutting the device down when no drive is installed

hdd_ssd_adapters/span>

•Supports 8 x PCIe M.2 NVMe SSDs of all lengths - 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Installs into 1 x standard external 5.25" optical drive bay
•Uses 8 x OCuLink (SFF - 8612) to connect, pin-out defined by SFF - 9402 Rev 1.1
•Supports PCIe 4.0 specifications with transfer rates up to 64Gbps per drive bay
•Powers 8 x M.2 SSDs through 2 x 15 - pin SATA power connectors
•Ruggedized full - metal enclosure meeting flammability requirements

nvme_enclosures,tool-less_tray_enclosures,high_density_enclosures

•Supports 4x PCIe NVMe U.2 SSD, up to 15mm drive height
•Installs into any standard external 5.25" optical drive bay
•Uses 4x OCuLink (SFF-8612) to connect, pin-out defined by SFF-9402 Rev 1.1
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Ruggedized full-metal enclosure meeting flammability requirements
•Removable tray system for easy maintenance

metal_tray_enclosures, nvme_enclosures

•Fits 4x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Installs into any standard external 5.25" optical drive bay
•Uses 4x OCulink (SFF-8612) to connect (NVMe host required)
•Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay
•Patent-pending screw-less M.2 adjustable locker holds all length drives securely
•Removable and tool-less drive installation design for easy drive maintenance

metal_tray_enclosures,nvme_enclosures ,tool-less_tray_enclosures

•Supports 1x 3.5" SAS/SATA HDD (SAS host is required for SAS HDD)
•Installed into any standard external 5.25" drive bay
•Tray-less design for hot-swapping bare drives without tools or screws
•Heavy-duty all-metal door latch for best drive protection
•Supports SATA 3.0 6Gbps or SAS 4.0 up to 24Gbp (Single channel SAS only)
•Supports SATA data and power cables with locking latches

tray-less_enclosures,sas_sata_enclosures

•Supports 2 x 2.5” or 3.5” SATA HDD/SSD
•Installs into any standard external 2 x 5.25” optical drive bay
•Supports up to 6 Gbps data transfer speed
•Built-In JMS562 hardware RAID 1 mirroring (SAFE) chipset
•Easy to read RAID status LED indicators for drive power, access, fail, and RAID 1 rebuilding process supports SATA and 15-pin power cable with locking latch design
•Anti-Vibration Technology (AVT) – reduces noise and protects against environmental damage

sas_sata_enclosures,drive_tray_enclosures

•Supports 24 x 2.5" SAS/SATA SSDs & HDDs, up to 7mm in height
•Installs into 3 x standard external 5.25" bay
•Transfer speed up to 24Gb/s for SAS drives & 6Gb/s for SATA drives
•Powers 24 x 2.5" SAS/SATA drive through 6 x 15-pin SATA power connector
•Connects 24 x 2.5” SAS/SATA drive through 6 x MiniSAS HD (SFF-8643) connector
•Large 80mm cooling fan with three-mode fan speed control (high/low/off)

metal_tray_enclosures,minisas_hd_enclosures,sas_sata_enclosures,high_density_enclosures,compatible_525_enclosures

•Fits 12 x M.2 SATA SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Installs into 1 x standard external 5.25" device bay
•Powers 12 x M.2 SSD through 2 x 15-pin SATA power connector
•Connects 12 x M.2 SSD through 3 x OCuLink (SFF-8612) connector
•40mm cooling fan with three-mode fan speed control (high/low/off)

sas_sata_enclosures,tool-less_tray_enclosures,high_density_enclosures

• Fits 1x EDSFF E1.S SSD with a maximum drive thickness of 9.5mm
• Use 1x PCIe 5.0 x4 interface, also supports installation into PCIe 1.0/2.0/3.0/4.0/5.0 x4, x8, and x16 slots
• Support PCIe 5.0 x4 with transfer rates up to 128Gbps
• Includes half-height and full-height PCIe brackets
• Removable drive tray with tool-less drive installation design for easy drive maintenance

Compatible 2.5" drive tray (caddy) for ICY DOCK ExpressCage MB742SP-B mobile rack enclosure.

Compatible M.2 SSD tray (caddy) for ICY DOCK ToughArmor MB833 and MB834 series mobile rack enclosures.

Compatible M.2 SSD tray (caddy) for ICY DOCK ToughArmor MB720 series mobile rack enclosures.

Compatible M.2 SSD tray (caddy) for ICY DOCK ToughArmor MB601VK-1B/MB601M2K-1B series mobile rack enclosures.

Note: Not Compatible with MB601VK-B

Compatible U.2 SSD tray (caddy) for ICY DOCK ToughArmor MB601VK-1B/MB601M2K-1B series mobile rack enclosures.

Note: Not Compatible with MB601VK-B

Compatible 2.5" drive tray (caddy) for ICY DOCK ExpressCage MB732SPO-B/MB324V4P-B mobile rack enclosure.

Compatible M.2 SSD tray (caddy) for ICY DOCK ToughArmor MB852 / MB872 / MB873 Series and ExpressSlot MB840 / MB842 Series mobile rack enclosures.

•Device holds single 3.5" SATA drive and fits any standard external 5.25" bay
•Support SATA 3.0 up to 6Gbps / SAS3.0 up to 12Gbps
•Removable tray system and hot swap capability offers convenient solution for multi-drive exchangeability & maintenance
•Rear warm air outtake fan ensures an optimal cooling environment
•Safeguard key lock function keeps data secure within the enclosure
•Aluminum body construction provides superior heat dissipation

drive_tray_enclosures,sas_sata_enclosures

•Fits 2x M.2 PCIe NVMe SSD with all length - 2230 (30mm), 2242, (42mm), 2260 (60mm), 2280 (80mm), and 22110 (110mm)
•Uses 2x OCuLink Gen 4 connector and support up to 64Gbps transfer speed per each bay
•OCuLink connector pinout supports SFF-9402 specification
•Installs into 9.5mm ultra-slim optical disk drive (ODD) bay *Minimum ODD bay clearance requirement - 160mm
•Designed for customized Industrial-PC, server rackmount, and embedded systems
•Removable drive tray with tool-less drive installation design for easy drive maintenance
•Eagle-hook lock system keeps the drive secure in the enclosure

nvme_enclosures,tool-less_tray_enclosures,high_density_enclosures,slim_odd_enclosures Interface_SlimSAS4i

•Fits 1x M.2 PCIe NVMe SSD with all drive length including 2230 (30mm), 2242 (42mm), 2260 (60mm), 2280 (80mm), and 22110 (110mm)
•Use 1x PCIe 3.0/4.0 x4 interface, also supports installation into PCIe 3.0/4.0 x8 and x16 slots
•Install into a single-width full-height/half-height PCIe expansion slot
•Removable drive tray with tool-less drive installation design for easy drive maintenance
•Low profile design allows for multiple bays to be installed side-by-side in a modular design
•Eagle-hook lock system keeps the drive secure in the enclosure

metal_tray_enclosures,nvme_enclosures,tool-less_tray_enclosures

•Compatible with Mac Pro 2008-2012 models with no driver required
•Fits 1x SATA hard drive or SSD from 7mm to 9.5mm in height
•Uses PCIe 2.0 x1 interface, also supports installation into PCIe 2.0 and PCIe 3.0 x1, x4, x8, and x16 slots
•Installs into single-width PCIe expansion slot
•PCIe interface provides both power and data transfer which ultimately reduce cable clutter
•Narrow design allows for multiple bays to be installed side-by-side in a modular design

metal_tray_enclosures,nvme_enclosures other_compatible_enclosures,sas_sata_enclosures

•Fits 2x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Adjustable drive locker holds all length drives securely
•Tool-less drive installation design for easy drive maintenance and system upgrading
•Installs into any standard external 3.5” device bay or floppy bay
•Uses a miniSAS HD port (SFF-8643) to connect, requires NVMe host
•Supports the full NVMe bandwidth specification of 64 Gbps

metal_tray_enclosures,nvme_enclosures , minisas_hd_enclosures,tool-less_tray_enclosures

•Fits 1x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Adjustable drive locker holds all length drives securely
•Tool-less drive installation design for easy drive maintenance and system upgrading
•Installs into any standard external 3.5” device bay or floppy bay
•Uses a miniSAS HD port (SFF-8643) to connect, requires NVMe host
•Supports the full NVMe bandwidth specification of 64 Gbps

metal_tray_enclosures,nvme_enclosures , minisas_hd_enclosures,tool-less_tray_enclosures #SlimSAS_4i

Compatible 2.5" drive tray (caddy) with dual lock for ICY DOCK ToughArmor MB492SKL-B mobile rack enclosures.

Compatible 2.5" drive tray (caddy) with dual lock for ICY DOCK ToughArmor MB491SKL-B mobile rack enclosures.

•Fits 4x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Adjustable drive locker holds all length drives securely
•Tool-less drive installation design for easy drive maintenance and system upgrading
•Installs into any standard external 5.25” device bay
•Uses 4x miniSAS HD (SFF-8643) to connect, requires NVMe host
•Supports the full NVMe bandwidth specification of 64 Gbps per channel

metal_tray_enclosures,nvme_enclosures , minisas_hd_enclosures,tool-less_tray_enclosures

•Fits 1x 2.5” U.2 NVMe SSD
(NVMe U.2 host is required to accept NVMe SSD
•Installs into any standard external 3.5” device bay or floppy bay
•Uses an U.2 port (SFF-8639) to connect, requires NVMe host
•Supports the full NVMe bandwidth specification of 64 Gbps
•Ruggedized full-metal enclosure meeting flammability requirements
•2-segment key lock for additional physical security

nvme_enclosures,metal_tray_enclosures

•Fits 1x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110)
•Adjustable drive locker holds all length drives securely
•Installs into any standard external 3.5” device bay or floppy bay
•Uses a U.2 port (SFF-8639) to connect, requires NVMe host
•Supports the full NVMe bandwidth specification of 64 Gbps
•Ruggedized full-metal enclosure meeting flammability requirements

nvme_enclosures,metal_tray_enclosures,tool-less_tray_enclosures

•Low profile design for small form factor applications such as industrial small PCs, surveillance, embedded systems, automation systems, aerospace systems and mobile DVR systems
•Dual Locks design – Metal key lock (for drive security) and thumb screw lock (for impact/vibration)
•Removable drive tray design for easy maintenance which fully supports SATA hot-swap
•Unique drive ID plugs for drive trays are included (#1 - #8)
•Fits 1 x 5mm to 15mm height 2.5” SATA HDD or SSD in external 3.5” drive bay
•Supports SAS or SATA HDD/SSD at 6Gbps and is backwards compatible with SATA 3Gbps drives and hosts (SAS host is required for SAS drives)

metal_tray_enclosures,sas_sata_enclosures

•Perfect for rugged applications and complies to flammability requirements
•Fits 4 x 2.5” U.2 NVMe SSD
(NVMe U.2 host is required to accept NVMe SSD)
•Supports NVMe 64Gb/s transfer rate
•Fits any external 5.25” drive bay
•Dual 40mm fans keep your drives from overheating
•Requires only 2 x 15pin power connectors to power all 4 bays
•Drive label plugs to keep track of your RAID drives

metal_tray_enclosures,nvme_enclosures , minisas_hd_enclosures

Compatible 2.5" drive tray (caddy) with metal lock for ICY DOCK ToughArmor MB411SPO-2B and MB993SK-B mobile rack enclosures.

•Rugged metal housing with durable ABS caddies for maximum security and protection
•Fits 1x 2.5" SAS/SATA HDD/SSD, and installs into a single 3.5" external bay (floppy bay)
•Supports 2.5" drives with 5mm, 7mm, 9.5mm, 12.5mm, and 15mm height
•Multi-Flow Technology - Provides excellent passive cooling
•Active Power Technology - Only powers on when a drive is installed, saving power
•Advances ExpressCage drive caddy MB741TP-B, with new drive-gripping mechanism, strengthened single-piece latch, and tool-less drive installation

tool-less_tray_enclosures,sas_sata_enclosures

•Rugged metal housing with durable ABS caddies for maximum security and protection
•Fits 2x 5mm-15mm 2.5” SATA HDD/SSD & 1 x Ultra Slim / Slim optical disk drive (ODD)
•Fits any external 5.25" drive bay
•Multi-Flow Technology – provides excellent passive cooling
•Accommodates 2.5" drives with 5mm, 7mm, 9.5mm, 12.5mm & 15mm height
•Active Power Technology (APT) - only powers up if there is drive installed in the drive bay

tool-less_tray_enclosures , slim_odd_drive_enclosures , 525_bay_adapters,sas_sata_enclosures,space-saving_enclosures

• Perfect for rugged applications and complies to flammability requirements
• Fits 8 x 5mm to 7mm 2.5” SATA hard drives or SSD’s in a single external 5.25” bay for high performance RAID applications
• Dual 40mm user-controllable fans, with settings for high, low, and off
• Connected by 2x Mini-SAS HD data cables for all 8 bays, for plug-and-play compatibility with most motherboards and RAID cards
• Requires only 2 x 15pin SATA power connectors to power all 8 bays (drives)
• Drive label plugs to keep track of your RAID drives

metal_tray_enclosures ,minisas_hd_enclosures, high_density_enclosures ,compatible_525_enclosures,sas_sata_enclosures

Compatible 2.5" drive tray (caddy) for ICY DOCK ToughArmor MB516/MB924/MB998 series mobile rack enclosures.

• Perfect for rugged applications and complies to flammability requirements
• Fits 8 x 5mm to 7mm 2.5" SATA / SAS hard drives or SSD's in a single external 5.25" bay for high performance RAID applications
• Dual 40mm fans keep your drives from overheating
• Requires only 2 x 15pin power connectors to power all 8 bays
• Drive label plugs to keep track of your RAID drives
• Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSDs

metal_tray_enclosures, high_density_enclosures ,compatible_525_enclosures,sas_sata_enclosures

Compatible 2.5" drive tray (caddy) with metal lock for ICY DOCK ToughArmor MB092/MB111/MB118/MB411/MB604/MB608/MB839/MB992/MB996 series mobile rack enclosures. Note: Not compatible with MB411SPO-2B.

•Perfect for rugged applications and complies to flammability requirements
•Fits 6 x 5mm to 9.5mm 2.5” SATA HDD or SSD in a single external 5.25” bay for high performance RAID applications
•Supports SATA 6Gbps or SAS 12Gbps (single channel)
•Powerful 40mm user-configurable cooling fan with high, low, and off settings
•Individual metal key-lock mechanism for each bay
•Ample ventilation for improved cooling performance

metal_tray_enclosures,compatible_525_enclosures,sas_sata_enclosures

Compatible 2.5" drive tray (caddy) with metal lock for ICY DOCK ToughArmor MB105/MB508/MB601VK-B/MB602/MB607/MB699/MB991/MB994 series mobile rack enclosures.

•Rugged Full Metal construction, perfect for rugged applications and complies with flammability requirement
•Fits 3 x 5mm to 7mm 2.5” SATA HDD or SSD in external 3.5” drive bay
•Supports SAS or SATA HDD/SSD at 6Gbps and is backwards compatible with SATA 3Gbps drives and hosts (SAS host is required for SAS drives - Single SAS channel
•Individual LED indicators
•Multi-Flow Technology (MFT) - provides excellent passive cooling
•Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSD

metal_tray_enclosures,sas_sata_enclosures, high_density_enclosures/span>

Compatible 2.5" drive tray (caddy) for ICY DOCK ToughArmor MB092/MB111/MB118/MB411/MB604/MB608/MB839/MB992/MB996 series mobile rack enclosures. Note: Not compatible with MB411SPO-2B.

•Built-in hardware RAID controller allows four different configurations: RAID 0 (FAST), RAID 1 (SAFE), JBOD, & BIG
•Supports SATA 6Gbps and hot swap
•Removable tray system for easy maintenance
•Front LED indicator lights for drive power, access, fail and RAID 1 rebuilds status
•Full metal construction, perfect for rugged applications and complies with flammability requirements
•Fits 2 x 7mm to 9.5mm 2.5” SATA HDD or SSD in a 3.5” front device bay

metal_tray_enclosures,sas_sata_enclosures

Compatible 2.5" drive tray (caddy) for ICY DOCK ToughArmor MB508/MB601VK-B/MB602/MB607/MB699/MB902/MB991/MB994 series mobile rack enclosures.

•Rugged heavy duty full metal construction with suggested applications in Imaging, Medical, and Military systems, Media servers, and IPCs, approved & used by Tier 1 companies
•Fits 1 x 5mm to 15mm 2.5” SATA HDD or SSD in external 3.5” drive bay
•Rugged heavy Duty Full Metal construction, perfect for enterprise applications
•Multi-Flow Technology - provides excellent passive cooling
•Anti-Vibration Technology - creates a safe environment for hard drives or SSDs
•Active Power Technology (APT) - individual led only powers up if there is drive installed in the drive bay

metal_tray_enclosures,sas_sata_enclosures ,other_compatible_enclosures

•Converts your 2.5” SATA HDD or SSD to a 3.5” SATA HDD or SSD, for 3.5” SATA drive bay usage
•Compatible with Most 3.5” SATA HDD Backplanes, Rackmounts and Hot Swap Devices •Designed for System Integrators and IT Professionals
•Screw-less Design For Quick & Easy Installation
•Full Metal and Heavy Duty with Easy Access to Drives
•Compatible with 7, 9.5, 12.5 & 15mm height drives

hdd_ssd_adapters

•Converts your 2.5” SATA/SAS HDD or SSD to a 3.5” SAS HDD or SSD, for 3.5” SAS drive bay usage
•Compatible with Most 3.5” SAS HDD Backplanes, Rackmounts and Hot Swap Devices
•Designed for System Integrators and IT Professionals
•Screw-less Design For Quick & Easy Installation
•Full Metal and Heavy Duty with Easy Access to Drives
•Compatible with 7, 9.5, 12.5 & 15mm height drives

hdd_ssd_adapters

• EZ-Lock mechanism for tool-less drive installation
• Heavy Duty Full metal construction with matte black finish
• Fits 2 x 2.5” SSD/HDD into a single internal 3.5” drive bay
• Compatible with SSD or hard drives with 9.5mm height
• Anti-Vibration design for improved reliability
• Universally designed screw placement for maximum compatibility

drive_mounting_kits

•Durable one-piece design
•Anti-Vibration design for improved reliability
•Fits 2 x 2.5” SATA/IDE SSD/HDD into a single internal 3.5” drive bay
•Compatible with 2.5” SSD & HDD with 7mm to 9.5mm drive height
•Quick release eject mechanism for hassle free tool-less drive installation
•Universally designed screw placement for maximum compatibility

drive_mounting_kits

•Fits 1 x 5mm to 15mm 2.5" SAS/SATA HDD or SSD in external 3.5" drive bay
•Rugged heavy Duty Full Metal construction, perfect for enterprise applications
•Multi-Flow Technology - provides excellent passive cooling
•Anti-Vibration Technology - creates a safe environment for hard drives or SSDs
•Active Power Technology (APT) - individual led only powers up if there is drive installed in the drive bay
•EMI Grounding – protects hard drives from electrical damage

metal_tray_enclosures,sas_sata_enclosures , other_compatible_enclosures

•Rugged Heavy duty full metal construction with suggested applications in Medical & Military systems, Media servers, and IPCs, approved & used by Tier 1 companies
•Rugged Full Metal construction, perfect for rugged applications and complies with flammability requirement
•Fits 2 x 5mm to 9.5mm 2.5” SATA HDD or SSD in external 3.5” drive bay
•Supports SAS or SATA HDD/SSD at 6Gbps and is backwards compatible with SATA 3Gbps drives and hosts (SAS host is required for SAS drives)
•Multi-Flow Technology (MFT) - provides excellent passive cooling
•Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSDs

metal_tray_enclosures,sas_sata_enclosures

•Durable one-piece design
•Anti-Vibration design for improved reliability
•Compatible with 2.5” SSD & HDD with 5mm to 15mm drive height
•Fits 3 x 2.5” SATA SSD / HDD into a single internal 3.5” drive bay (5-7mm height drive)
•Fits 2 x 2.5” SATA SSD / HDD into a single internal 3.5” drive bay (1 x 9.5-15mm + 1 x 5-7mm height drive)
•Quick release eject mechanism for hassle free tool-less drive installation

drive_mounting_kits

•Full steel construction commercially designed for Medical & Military systems, Media servers, and IPCs, approved & used by Tier 1 companies
•Perfect for rugged applications and complies to flammability requirements
•Fits 4 x 5mm to 15mm 2.5” SAS/SATA HDD or SSD in a single external 5.25” bay for high performance RAID applications
•Support SATA 3.0 6Gbps / SAS 3.0 12Gbps (single channel)
•Requires only a single 15pin power connectors to power all 4 bays
•Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSDs

metal_tray_enclosures ,compatible_525_enclosures,sas_sata_enclosures

•Rugged heavy-duty steel construction designed for industrial and commercial applications such as military and medical, servers, data centers, workstations, and portable computer systems
•Perfect for applications that must meet a flammability requirement
•Fits 6x SSDs or HDDs between 5mm and 7mm in height
•Supports SATA 3.0 6Gbps / SAS 3.0 12Gbps (single channel)
•Supports Ultra-Slim (9.5mm) Optical Disk Drive (ODD Drive)
•Spring-loaded ODD bracket for fast installation and removal

metal_tray_enclosures,slim_odd_drive_enclosures ,compatible_525_enclosures,sas_sata_enclosures

•Rugged heavy-duty steel construction designed for industrial and commercial applications such as military and medical, servers, data centers, workstations, and portable computer systems
•Perfect for applications that must meet a flammability requirement
•Fits 4x SSDs or HDDs between 5mm and 9.5mm in height
•Supports SATA 3.0 6Gbps / SAS 3.0 12Gbps (single channel)
•Supports Slim (12.7mm) or Ultra-Slim (9.5mm) Optical Disk Drive (ODD Drive)
•Spring-loaded ODD bracket for fast installation and removal

metal_tray_enclosures,slim_odd_drive_enclosures ,compatible_525_enclosures,sas_sata_enclosures

•Rugged heavy-duty steel construction designed for industrial and commercial applications such as military and medical, servers, data centers, workstations, and portable computer systems
•Perfect for applications that must meet a flammability requirement
•Fits 2x SSDs or HDDs between 5mm and 15mm in height
•Supports SATA 3.0 6Gbps / SAS 3.0 12Gbps (Single channel)
•Supports Slim (12.7mm) or Ultra-Slim (9.5mm) Optical Disk Drive (ODD Drive)
•Spring-loaded ODD bracket for fast installation and removal

metal_tray_enclosures,slim_odd_drive_enclosures ,compatible_525_enclosures,sas_sata_enclosures

•Fits 1x 2.5” U.2 NVMe SSD
(NVMe U.2 host is required to accept NVMe SSD
•Fits any external 3.5" drive bay or floppy bay
•Supports NVMe 64Gb/s transfer rate
•Supports SATA 6Gb/s or SAS 12Gb/s (single channel)
•Accommodates 2.5" SSD with 5mm, 7mm, 9mm, 12.5mm & 15mm height
•Eagle-hook lock system & 2-segment safeguard key lock keeps drives secure within the enclosure

nvme_enclosures,metal_tray_enclosures

•Supports docking up to 2 x 2.5 inch SAS / SATA HDD / SSD with hot-swap function (5mm – 9.5mm)
•Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (single channel)
•Fits any external 3.5” drive bay or floppy bay
•Full metal chassis with partial ABS-plastic for full protection
•Completely tray-less design and accepts bare drives without trays or holders
•Drive door-less design for quick hot-swapping

tray-less_enclosures,sas_sata_enclosures

•Supports docking 1 x 2.5” SAS/SATA HDD/SSD with SATA hot-swap functionality (5mm – 15mm)
•Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (single channel) •Fits any external 3.5” bay
•Full metal chassis with industrial ABS plastic for full protection to the drive
•Completely tray-less design and accepts bare drives without trays or holders
•Drive door-less design for quick hot-swapping

tray-less_enclosures,sas_sata_enclosures

•Perfect for rugged applications that must meet flammability requirements
•Fits 16 x 5mm to 7mm 2.5” SATA/SAS hard drives or SSDs in 2x external 5.25” bays for high performance RAID applications
•Supports SATA 6Gbps or SAS 12Gbps (single channel)
•Large 80mm cooling fan circulates a massive amount of air, while running quietly
•Fan is user-adjustable, with settings for high, low, and off
•Powered by 4x 15-pin SATA power cables for all 16 bays

metal_tray_enclosures , minisas_hd_enclosures, high_density_enclosures,compatible_525_enclosures,sas_sata_enclosures

•Removable drive tray system for easy maintenance
•Rugged heavy duty full-metal construction of all internal and external components
•Perfect for rugged and industrial applications that must meet flammability requirements
•Fits 8x 5-15mm 2.5” SATA/SAS hard drives or SSDs in 2x 5.25” external CD/DVD drive bays
•Supports SATA 3.0 up to 6Gbps or SAS 4.0 up to 24Gbps (single channel)
•Large 80mm cooling fan with high, low, and off settings for full control

metal_tray_enclosures , minisas_hd_enclosures , high_density_enclosures ,compatible_525_enclosures,sas_sata_enclosures

•Low profile design for small form factor applications such as industrial small PCs, surveillance, embedded systems, automation systems, aerospace systems and mobile DVR systems
•Fits two drives in a single 3.5” front device bay which is perfect for RAID configurations
•Dual Lock Design - Metal key lock (for drive security) and thumb screw lock (for impact/vibration)
•Removable drive tray design allows easy maintenance and fully supports SATA hot-swap
•Unique drive ID plugs for drive trays are included (#1 - #8)
•Fits 2 x 5mm to 9.5mm height 2.5” SATA HDD or SSD in a external 3.5” drive bay

metal_tray_enclosures,sas_sata_enclosures

Compatible 2.5'/3.5" drive tray (caddy) for ICY DOCK FatCage MB153/MB155/MB876/MB901 series mobile rack enclosures.

•Exact same form factor of an ultra slim optical drive
•Fits 1 x 5mm to 7mm height 2.5" SATA HDD / SSD in a 9.5mm ultra slim ODD bay
•Supports transfer speed up to 6Gbps
•The receiving SATA connector rated for up to 10,000 drive insertions
•Removable EZ Slide Slim drive tray for easy maintenance
•Heavy duty full metal construction design - perfect for enterprise applications

metal_tray_enclosures,sas_sata_enclosures ,slim_odd_enclosures,sas_sata_enclosures

•Exact same form factor of a slim optical drive
•Fits 1 x 5mm to 9.5mm height 2.5” SATA HDD / SSD in a 12.7mm slim ODD bay
•Supports transfer speed up to 6Gbps
•The receiving SATA connector rated for up to 10,000 drive insertions
•Removable EZ Slide Micro drive tray for easy maintenance
•Heavy-duty full metal construction design - perfect for enterprise applications

metal_tray_enclosures,sas_sata_enclosures,slim_odd_enclosures ,other_compatible_enclosures,sas_sata_enclosures

•Ultra small form factor design for maximum space saving
•Fits 1 x 5mm to 9.5mm height 2.5” SAS/SATA HDD/SSD in a 12.7mm slim ODD slot or any FDD slot
•Supports SATA 3.0 up to 6Gbps / SAS 3.0 up to 12Gbps (Single channel)
•Removable EZ Slide Micro drive tray for easy maintenance
•Heavy duty full metal construction design - perfect for enterprise applications
•Multi-Flow Technology provides excellent passive cooling

metal_tray_enclosures,sas_sata_enclosures ,slim_odd_enclosures ,other_compatible_enclosures

•Ultra small form factor design for maximum space saving
•Fits 1 x 5mm to 9.5mm height 2.5” SAS/SATA HDD/SSD in a 12.7mm slim ODD slot or any FDD slot
•Supports 2.5” SAS (single channel)/SATA HDD/SSD up to 6Gbps transfer rate (SAS host is required for SAS drives)
•Eagle-hook lock system & 2-segment safeguard key lock keeps drives secure within the enclosure
•Supports SATA 6Gbps or SAS 3.0 12Gbps (Single channel)
•Removable EZ Slide Micro drive tray for easy maintenance

metal_tray_enclosures,sas_sata_enclosures ,slim_odd_enclosures ,other_compatible_enclosures,sas_sata_enclosures

•Only require a single 5.25” ODD drive bay space
•Supports up to 4x 2.5” HDD/SSD with 5mm, 7mm, and 9.5mm height
•Supports 1x Slim ODD (12.7mm height) or 1x Ultra-Slim ODD (9.5mm height)
•Unique built-in screw design with 2.5” drive caddies offers tool-less drive installation
•Patent-pending proprietary single-latch mechanism for easy drive installation and removal
•Unique multifunctional detachable ODD bay faceplate for ODD slot

drive_mounting_kits , 525_bay_adapters

•Fits 4 x 2.5” SATA HDD / SSD into a single extermal 5.25” bay
•Compatible with 2.5” HDD / SSD with 7mm to 9.5mm drive height
•Tool-less drive installation design with advanced drive stabilizer system
•Compatible with any standard external 5.25” bay
•Open frame design for maximum passive cooling
•Option to be used as a stackable drive organizing rack

drive_mounting_kits , 525_bay_adapters

•Durable one piece, lightweight construction
•Compatible with any standard 5.25” external drive bay
•Fits 1 x 3.5” device / hard drive and 1 x Ultra-Slim ODD
•Snap-off front panel dust covers for 3.5” bay and Ultra-Slim ODD bay
•Advanced device guiding system for smooth device / drive installation
•Smart-Tip locking mechanism for screw-less 3.5” device installation

space-saving_enclosures , drive_mounting_kits , 525_bay_adapters

Compatible 2.5" drive tray (caddy) for ICY DOCK ExpressCage MB324SP-B mobile rack enclosure.

Compatible 2.5" drive tray (caddy) for ICY DOCK ExpressCage MB322/MB326 series mobile rack enclosures.

•Compatible with any standard external 5.25” device bay
•Fits 2x 2.5” SATA/SAS HDD/SSD and 1x 3.5” HDD/Device
•Supports 2.5” SATA/SAS HDD/SSD of 5mm to 9.5mm height
•Supports SATA 6Gbps or SAS 4.0 up to 24Gbp (Single channel)
•Active Power Technology (APT) - only powers up if there is drive installed in the drive bay
•Soft blue indicator LED provided for each 2.5” HDD/SSD bay

tool-less_tray_enclosures , space-saving_enclosures , 525_bay_adapters,sas_sata_enclosures

•Tray less hot swappable drive cage
•Fits full sized and half height 3.5” SATA drives into a single external 5.25” bay
•Supports up to 6Gb transfer speeds (depending on host configuration)
•Heavy Duty all metal construction
•Locking mechanism to protect your data
•Ultra slim 80mm fan to keep your drives cool

•Compatible with any standard 5.25” external bay
•Fits 1x 3.5” SATA HDD and 1x 9.5mm Ultra-Slim ODD device
•Dual-purpose drive guiding mechanism & stabilizer
•Tray-less, screw-less, tool-less 3.5” drive installation
•Spring loaded dust cover for 3.5” bay, snap-off dust cover for ODD bay
•Both bays powered by a single 15-pin SATA power connector

tray-less_enclosures , slim_odd_drive_enclosures,sas_sata_enclosures,space-saving_enclosures

•Device stores a single 2.5" or 3.5" SATA III 6Gbps drive and fits most standard external 5.25" bay
•Supports SATA 3.0 6Gbps / SAS 2.0 6Gbps (single channel)
•Hard drive power and activity LED indicators for essential drive status
•Safeguard key lock function keeps data secure within the enclosure during operation
•Full aluminum body construction provides superior heat dissipation
•40mm rear warm air outtake fan ensures an optimal cooling environment

drive_tray_enclosures,sas_sata_enclosures

•Perfect for rugged applications and complies to flammability requirements
•Fits 8 x 5mm to 7mm 2.5” SATA hard drives or SSD’s in a single external 5.25” bay for high performance RAID applications
•Dual 40mm fans keep your drives from overheating
•Requires only 2 x 15pin power connectors to power all 8 bays
•Drive label plugs to keep track of your RAID drives
•Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSDs

metal_tray_enclosures, high_density_enclosures , compatible_525_enclosures

•Rugged metal housing with durable ABS caddies for maximum security and protection
•Fits 2x 5mm, 7mm, & 9.5mm 2.5” SATA HDD/SSDs, and installs into a single 3.5” external bay (floppy bay)
•Multi-Flow Technology – provides excellent passive cooling
•Accommodates 2.5" drives with 5mm, 7mm & 9.5mm height
•Active Power Technology (APT) - only powers up if there is drive installed in the drive bay
•Advanced ExpressCage drive caddy MB742TP-B with a new drive-gripping mechanism, strengthened single-piece latch, and tool-less drive installation

tool-less_tray_enclosures,sas_sata_enclosures,tool-less_tray_enclosures